| Product Description |
|
Features |
|
Specifications |
|
Reviews (4)  |
|
|
Arctic Silver 5 is optimized for use between modern high-power CPUs and high performance heatsinks or water cooling solutions. Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer. Arctic Silver 5 also contains micronized zinc oxide, aluminum oxide and boron nitride in addition to the silver. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability. Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
Download the Material Safety Data Sheet
Contains 99.9% pure silver:
- Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.
High-Density:
- Arctic Silver 5 contains over 88% thermally Conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.
Controlled Triple-Phase Viscosity:
- Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.)
Absolute Stability:
- Arctic Silver 5 will not separate, run, migrate, or bleed.
| Thermal Conductance: |
>350,000W/m2 °C (0.001 inch layer) |
| Thermal Resistance: |
<0.0045°C-in2/Watt (0.001 inch layer) |
| Average Particle Size: |
<0.49 microns <0.000020 inch |
| Extended Temperature Limits: |
Peak –50°C to >180°C Long-Term –50°C to 130°C |
| Performance: |
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. |
| Coverage Area: |
This 3.5 gram tube contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram tube will cover approximately 16 square inches. |
Total Reviews: 4 Average Rating: 
AS5, I think I love you.
02-24-2010
Reviewer: helplessbob (11)
Awesome stuff. I wouldn''t use anything else.
Good stuff
06-15-2009
Reviewer: Anonymous
works great
easy to use
12-24-2008
Reviewer: Zolrak (3)
I think this has much to do whit my new CPU temperature, so has a 5 ;)
Best stuff in its class...
11-24-2007
Reviewer: Franzkefka (13)
Doesnt even compair to Liquid pro, BUT!. what i have noticed in using these 2 different thermal compounds is that for the most part AS5 works alot better on large contact surfaces, such as AMD and Intel CPU''s with the IHS'' intact. Also works better on the larger G80 gpu than liquid pro did. i Assume its do to poor surface contact as liquid pro tends to lay so flat that if the IHS or Heatsink arent both flat as glass liquid pro doesnt make good contact. and it also is useable on aluminum.
so IMO. Toppless CPU''s with copper coolers go with liquid pro
IHS''d Cpu''s and gpu''s with copper or aluminum Heatsinks go with AS5.
 Single Item Shipping Calculator |
Shipping Estimate |
|
Note: Shipping costs for multiple items will be less than individual shipping quotes. Please proceed to checkout to receive multiple item shipping quotes.
|
|
|
|
|
People who bought this item also bought |
|
|
|
|