Clearneon UV Reactive Clear Coat Paint - Red, large size, invisible black light reactive clear coat. Contents spray out very fine mist and goes a very long way. Transparent in day light and fluoresces under blacklight. Great for stencils or freehand drawings. Very durable, yet it can be removed with ammonia cleaner, even after drying.

NON-CONDUCTIVE
The paint is completely non-conductive and can be applied to motherboards and other electrical components.

Applies a coating which is transparent and colorless under normal light, but glows under UV black lighting. Easily removable from most surfaces with soap and water. May not be completely removable from porous materials (such as bare wood, cardboard, paper, foam, accoustic ceilings and flat paint).

Use:
Use at room temperatures. Hold 3 to 12 inches from surface. Move can in even continuous strokes. Dries in 4 to 5 minutes. Surface should be clean and dry, free from dirt and oil. Before use, check for any adverse effects by applying clear neon in an inconsipuous area. May be removed with window cleaner.

First Aid:
Always get prompt medical attention if any ill effects. If in eyes, immediately flush thoroughly with water, remove any contact lenses.

Extremely Flamable:
Do not drop, puncture or incinerate. Use in well ventilated area. Avoid Fire, flame or smoking during use until thoroughly dry. Do not store in temperatures above 120°F. Keep out of the reach of children. Use only as directed. Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal. Product should not be used by or near pregnant women.

DANGER! EXTREMELY FLAMMABLE. KEEP OUT OF THE REACH OF CHILDREN. CONTENTS UNDER PRESSURE. AVOID SPRAYING IN EYES.

Mouse over the image to the left to see the paint disappear when it isn't illuminated by a Black Light

Ingredients:

• Dimethyl Ether
• Sd Alcohol 40-B (Alcohol Denat.)
• Acrylate Copolymer
• Water
• Pigment

10-05-2011
Reviewer: Lyanheart (4)
Used this to add some flash to the backplate of my video card. Worked great- glows a very intense red under my UV cathode tubes (and this was done over flat black). Gets brighter the closer it is to the light source. I was very impressed and might do more with different colors. Wish it wasn''t so expensive.

09-17-2010
Reviewer: jmcu (1)
If you are looking to use this for your pc don''t buy it.. I applied the red to the inside of my case ( black ) ant it covers like crap.. It also turns areas to a white looking film on spots..Tried it on a couple of cables and it filmed those up as well. It does have great uv glow.. on your skin and other surfaces, but not on a black 800d case.. and the white color is sad... Don''t forget the black, you will need it. I read other reviews and was warned, but wanted to try it myself.. Should of listened..

03-12-2008
Reviewer: Drujon (33)
If you have the money and the time, I say why not! I actually used this stuff to spruce up an entire college dorm common area... never got caught by the RAs hahaha. Barely detectable under normal lighting merely by the glossy effect it creates on surfaces, but if you do a good job it will work well! Check their website for bulk sizes if you want to use this for other applications, as I chose to. I plan on coating the inside of my cosmos case in a bright white layer to make it sort of foreign and unusual!