The Zalman Fatal1ty FC-ZE1 Champ1on Series Aluminum Case features innovative engineering everywhere. Tool-less hard drive installation; heavy aluminum panels with door hinges for easy access, good heat conduction and low noise; laser etched graphics and red LED fans for visual appeal.

This is a case that will attract and improve your computer's performance.

• Patent pending tool-free Hard Disk Drive Chassis
• Constructed with 100% anodized aluminum panels
• Door-type left side panel for convenient component installation and maintenance
• Thick and firm panels for prevention of vibration amplification
• Dual 92mm red LED intake fans and a 120mm red LED exhaust fan for maximum visual and cooling effect
• Precision laser-etched exterior graphics

Enclosure Dimensions:	480 x 220 x 430mm (L x W x H)
Weight:	12.5 kg
Material:	Pure Aluminum
Motherboard Compatibility:	ATX & microATX
PSU Support:	ATX PSU
5.25 inch Bay:	4 (exposed)
3.5 inch Bay:	1 (exposed) 3 (hidden)
Cooling Components:	1 x 120mm Rear Red LED Fan 2 x 92mm Front Red LED Fans w/ Multi-Connector (ZM-MC1)
Expansion Card Slots:	7 Slots
Front I/O Ports:	2 x USB 2.0 1 x IEEE1394a 1 x Mic 1 x Headphone

07-14-2008
Reviewer: sturm (2)
With 4-5mm aluminum panels, this is likely the only case you''ll have to invest in unless you''re planning on a massive Skulltrail rig with a RAID 10 array. Yes, some of the logos stray into the gaudy side of design, but are not as garish as some reviewers would have you believe. Motherboard and expansion card installations were nearly effortless. I have to knock off a point for lack of any support for motherboard installation, a thin transparent side panel and a noisy rear exhaust fan. The twin intake fans are nearly silent when set to 1500 rpm. It is on the expensive side for a non-ESA case, but the solid construction is worth the investment.

09-09-2007
Reviewer: MSJ3990 (2)
This is an Excellent case! By far the best I have ever had. Outstanding quality.

11-25-2006
Reviewer: Rob (1)
Before I begin, I would like to say thanks to the people at frozencpu for the extra fast delivery. I am in the military stationed in England so I normally wait anywhere from 2 weeks to a month before I receive my orders. With frozencpu I received this case in about a week. I cannot thank you enough. Now on to the case. It comes very well packaged by Zalman and was received without a scratch. The case is beautiful and very sturdy. All the hardware you will need comes included and the instructions are simple and to the point. The HDD bay is extremely simple to use and has a foam backing to dampen any vibration the HDD might make. The cables in the case are neatly routed and clearly marked. Some reveiws claim that the power supply is a pain to install but I had no problems whatsoever. The side panel is very easy to remove...two thumbscrews and then slide the lever backwards. The door is on a hinge so it just opens outward. There is plenty of room inside the case to work with. Zalman includes velcro zipties to neatly organize all your cables. This is my 4th case I have owned and I say without hesitation that it is by far the nicest. It''s very sturdy construction, simple design, and innovative hard drive bay make this case worth the extra money. The only negative thing I have to say is the fact that you have to remove six allen screws to remove the right side panel so you can install screws in your cdrom or floppy drive. Very minor discrepancy though since I will probably not be going in and out of there very often. Again, great case received by an even greater company. Thanks Frozen!