The Thermaltake Aquabay M5 Safety Kit features a complete alarm system, pump / reservoir combo and LCD display for your liquid cooling system. A level sensor protects your system from running out of fluid, temperature sensors protect from overheating and the LCD display lets you check on the condition of the system at any time.

Features

• Compatible with Thermaltake’s L.C.S( Liquid Cooling System) and components
• Liquid temperature and level monitor in the 5.25" drive bay.
• Easily monitor the liquid temperature and level from LCD panel in the front.
• Built-in liquid temperature and level alarm.
• The signal will flash，error beeps will occur and the LCD panel will change colors from blue to red when the coolant is below the "low" mark.
• The LCD panel will change colors from blue to red if the temperature of the system is higher than the set alarm temperature.
• Fast response probe:
• Temperature probe can detect the water temperature in real-time.
• Liquid level probe can detect the coolant level in real-time.
• User Friendly
• The temperature probe can be put at anywhere within the LCS loop
• Quick Install Connectors
• The temperature probe connector is suitable for tubing of ID 6.4mm(1/4”)/9.5mm(3/8”)

Includes

• 5.25” driver bay temperature and liquid level display panel
• Temp. probe for ID 6.4 mm(1/4”) and 9.5mm(3/8”) tubing with temperature sensor
• P500 pump with 500L/h flow rate
• 350 CC liquid tank with liquid level sensor
• Quick install connectors for ID 6.4mm(1/4”) and ID 9.5mm(3/8”)

Functions Of LCD Panel

• Power on or power off switch
• Reset the alarm temp
• Reset the alarm after going off
• Toggle Celsius and Fahrenheit

LCD panel
Sampling rate:	1 sec
Water temp. range:	0°C ~ 95°C
Resolution:	0.1 °C
Accuracy:	+/- 1 °C
Display:	Constant/Real time
Temp alarm setting range:	25 ° C ~ 70°C+/- 5 ° C
Temp. normal status:	LCD with blue light
Temp. and liquid level alarm warning:	LCD with red light
P500 pump
Rated voltage:	DC 12V
Input current:	600 mA
Bearing:	Ceramic bearing
Flow rate:	500L/h
Connector:	3pin & 4pin
LED:	Blue
Noise:	16dB
Life time:	80,000 hours
Other Specs
Capacity of liquid tank:	350 cc
The temp. probe:	Swiftly read the temperature of your system
Quick install connectors:	ID 6.4 mm(1/4”) & ID 9.5 mm(3/8”) tubing
Weight:	930g

05-17-2009
Reviewer: Protos (4)
Just be aware the pump is garbage. If your buying it for the sensor bay, resevoir and and temp sensor thats fine. Just know that the pump is total junk. Ordered a swiftech 655.

05-15-2009
Reviewer: Protos (4)
Not a bad little kit. Pump is not as quiet as could be but will replace when it goes. Watertemp probe is heavy and needs good support or will kink line. Also restricts flow more than I like. Overall though good package, hard to beat for the price. Pump is not the greatest, but hey you get a lot of other components and you can replace pump when it goes.

03-30-2009
Reviewer: Sportyinc (2)
I have used two of these and the price can''t be beat. This is a great pump and reservoir combo. The LCD panel has adj. temp and water level alarms. Already has temperature probe. Flow indicator not needed. The Thermaltake Aquabay M2 2U radiator is a perfect match. Check it out.

05-02-2008
Reviewer: Doug (2)
Pros: No leaks as long as your tubing is cut square. Alarm is loud and can be turned off. Easy to fill. Cons: Temp probe is kinda heavy so support it if needed. Pump is a little loud at first but wears in ok. Good flow. Get the flow indicator/temp probe if you buy this.