PC ICE is a revolutionary development in liquid cooling. Specially formulated to improve today’s most advanced PC cooling systems. PC ICE overcomes the shortcomings of competitive fluids available on the market today. Testing has revealed that PC ICE is capable of staying within 2C* of standard water, while maintaining its non-conductive** nature as well as lubricating properties.

PC ICE is specially formulated with lubricating properties to increase pump life and contains corrosive inhibiting ingredients to cut down on internal build up and galvanic corrosion. PC ICE is safe on all plastic, rubber and miscellaneous gasket materials as well as Non-Toxic, biodegradable and environmentally safe. PC ICE is formulated for high flow pumps and is not prone to mechanical sheering. It is as clear and acceptable to use with color adding dye for aesthetic purposes. PC ICE has a 3 year shelf life, is non-conductive and has a freeze point below -60°F.

Note:
Test results were in a temperature control environment and are averages. PrimoChill does not guarantee that you will have the same results.

PC Ice can become conductive when and if it comes in contact with dust or other fluids that may be conductive. As this is with all Non-Conductive fluids sold on the market today. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust especially in a water cooling system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

USAGE NOTES:

*Non-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up.

Color Delivery System:

Your PC ICE will arrive clear with an enclosed "Dye Bomb" of your choice. This unique coloring system allows the dye to maintain its concentration by limiting light exposure until you are ready to place it in your system. Keep an eye open for exciting new colors, and keep in mind that you can mix dye bombs to create the exact color you need.

Mixing Instructions:

1. Remove Cap from PC ICE bottle and Dye Bomb.
2. Place dye bomb syringe into the top PC ICE bottle and depress the dye
into the bottle.
3. Draw PC ICE fluid up into the syringe until full.
4. Press plunger all the way down, releasing all fluid
into the PC ICE bottle.
5. Repeat steps 3 and 4 until the desired tint is achieved.

Proof that Primo Chill ICE Liquid Cooling Fluid really is NON-CONDUCTIVE! Check out this movie! (WMV)

Features:

• Non-Conductive
• Freeze point below -60°F (-51°C)
• 2-5°C gain in thermal efficiency
• Available in UV Reactive Colors
• Pre-Mixed - just add it to the system (color dye added by user)

Pre-Mixed:	Yes, just add to system
Bottle Size:	32 oz. (946.4 ml)
Fluid Color:	Clear (Not UV Reactive)

09-22-2008
Reviewer: Anonymous
I bought this fluid about 2 months ago for my first liquid cooling setup from MicroCenter and I have to say it was a bad choice. ALL the dye separated from the liquid and coated the walls of my PrimoChill tubing leaving me with clear fluid. On top of that algae is gorwing in my waterblock and reservoir which will be a pain to remove. However, I will say that this fluid does it''s job well, my temps dropped 20C from the stock cooling (Intel E8400), but the dye is not recommended.

06-21-2008
Reviewer: Arrowslinger (10)
First, I have just short of 3 quarts of this fluid in my cooling system right now. In total, I used 5 dye bombs to get it remotely resemble the color you see on the bottle here in my system. It does work well, no algea after 4 months of use, but the color does not last and fades rather quick.

03-08-2008
Reviewer: lkmdolphin (1)
When I first set up my Thermaltake water cooler, I used the coolant provided by the maker. Big mistake. Within a few short months, the coolant was growing algea and corroding every piece of aluminum hardware in the system. I read some reviews online and decided on PC-ICE as a replacement. I''ve been running it for over a year and a half with absolutely ZERO problems. No clouding, No corroding of parts, No discoloration of my clear tubing, and no pump problems. The beautiful blue color has not faded at all and looks terrific with the white 4" CCFL tubes I have behind the fluid level tank & flow meter. I will forever more use and recommend PC ICE to everyone who wants to know. I teach advanced computer hardware at our local Community College and when we talk about modding I always let my students know what to buy for water cooling maximum performance.