The Zalman ZM-MFC1 Plus Multi Fan Controller is a 6 channel fan controller that fits in a 5.25" bay. The unit has 2 channels with active RPM sensing and 4 channels without. This is a perfect unit for fine tuning your noise levels and cooling capacity inside your case!

• 6 Channel Multi Fan Controller
• Comprehensive Control of Cooling Performance and Noise
• Aluminum Front Panel for Maximum Aesthetic Quality
• Fast & Easy Access to Fan RPM Control
• Color & Intensity Variable LEDs for Simple Monitoring of Fan Speed

Dimensions:	148.5(L) X 65(W) X 42(H)mm
Channels:	6
RPM Sensing:	Active RPM Sensing (All 6 Channels)
Fan Cables:	C1 Cable x 2 - Active RPM Sensing C2 Cable x 4 - Non-RPM Sensing
Weight:	220g
Maximum power:	7.0W per channel
Input voltage:	12VDC
Output voltage:	5VDC - 11VDC 5%

11-09-2011
Reviewer: ()
I''ve been running this product for over 2 years now. Runs like a champ however, This is meant for small, low power fans! great for my 120mm, but won''t push a high power fan! my only fault with this is that on minimum it doesn''t turn off the fans and on full they only run 80-90%

09-07-2010
Reviewer: mrgoodcat (2)
i ended up buying two of these. the first one i tested on a separate power supply, and hooked up 3 ultra kazes to it, and 2 slipstreams. it failed to power them. i thought maybe this was the power supplies fault so i hooked it up to my computer. (at the time i made all my own cables) i ended up screwing up the cable i literally frying the fan controller. (glad i messed up that cable rather than any other in my comp haha) anywho, so i bought the second one, this time used the cable it came with. hooked it up to my comp and same thing as the first one on the test power supply, failed to power even a single fan. the fans would turn at such a slow speed you could hardly feel air moving (thats what i mean by "did not power"). my lian li v1010b case came with an ugly 3 fan fan controller with a switch for 5v, 7v, and 12v. i daisy chained fans together and hooked up the same combo to it that i had mentioned above...it ran the fans with no problem. moral of story, don''t buy this! it does look nice though...i''ll give it that

07-12-2010
Reviewer: EleSSaR (1)
Only reason I am giving this thing 1 star is the ability to go from a blue led to red and how nice this controller looks. This controller never ran my 3 scythe fans at 100%, and now already after 1 month of use 5 out of 6 lights have turned purple, meaning both red and blue are on. Overall piece of junk. Don''t buy. supposed to handle 1.0amp per channel, can''t handle 0.60.