The Ultra 3.5" Multi-Fan Controller is designed to control and power 4 fans at up to 12 Volts! You want complete control over your case fan RPM's in order to get that perfect balance of low noise and keeping components cool. But when you're gaming, and your components start getting hot, isn't it good to know that your fans are capable of moving as much air as possible? Most fan controllers won't even let a fan spin at
100% of it's specified RPM even when the controller is turned up to it's maximum. It's not unusual for power to get lost through the circuitry of the controller and the resulting drop in voltage prevents your fans from moving as much air as possible. This is why Ultra designed the new Multi-Fan Controller from the ground up.

By thinking outside of the box, they've created a fan controller that not only runs the fans from 0% to 100% of their rated speed, but also can run a fan up to 10% faster than it's specification! The Ultra Fan Controller has four channels, each capable of outputting between 7V and 12V. The controller fits in any available external 3.5" bay and emits a subtle blue light from around each knob. The controller uses standard 3-pin fan headers and even includes 3-pin extensions so RPM's can be monitored by the motherboard

• 4 Channel Multi-Fan Controller
• Adjustable Blue LED Fan Speed Knob
• RPM overpower up to 10% maximum fan speed
• RPM monitor cable for compatible motherboards

Specifications
Input Voltage:	5V
Output Voltage:	7.0-12V
Output Current:	Up to 1.5A
Dimensions:	4" x 1" x 5.5"
Controllers:	4 Fans
Compatibility:	Fits in a standard 3.5" drive bay

11-19-2008
Reviewer: ElWampa (1)
About a month after purchase one fan port died, switched to one of the other ones and that lasted ''til now. Just today, two fan ports died and one is still working. Avoid this product unless you need a quick fix. You get what you pay for.

08-21-2008
Reviewer: K1yka (18)
Work''s good, feels cheap on the outside but when it''s in it looks pro. Tons of wires on it so make sure you have room to stuff!

05-21-2008
Reviewer: CJ (1)
Had this for a couple weeks and couldn''t be happier. Was able to slow down my high speed fans when not gaming so they arent so loud.

10-03-2007
Reviewer: Robert (7)
I''m using this in the floppy bay of my Antec P180B case to control 3 Noctua 1200rpm fans. The best thing about this is the price point; i.e.it''s cheap and seems to work just fine. The case is plastic, not metal, but that makes it easier to ventilate if you want more air cooling. it comes pre-ventilated. It is setup to allow you to monitor the fans from your motherboard if you have the 3 pin connections to do so. Since I''m only using 3 fans I popped the lid open and put the extra unused fan lead inside the case, which has a lot of extra room. That''s when I noted that the cable strain relief is simply a knot in the 5 cables inside the case. Like I said, it''s cheap, but it works. Looks nice when installed too. I sleeved mine at home and that makes the thin cables a bit more rigid for easier routing.