The Thermaltake Flow TX Plus Flow Meter w/ Temperature Indicator (CL-W0138) is a perfect combination of flow meter and temperature indicator. Combining these two creates less connections in your system which in turn means less chance for leaking.

There are two temperature shown on the screen (T1, T2).
T1 always mean pre-setting temperature as well as
T2 representatives the temperature from sensor.

ON / OFF: power on or power off switch.
。C/。F : Celsius and Fahrenheit display switch.
RESET: clean the temperature setting. (MAX & MIN)
REC: Please adjust the pre-setting temperature by using the cross-head screw driver.

Whatever it shows the temperature you would like to set, ( the screen should be shown without MIN or MAX, see fig 1), please press the button "REC" to record the temperature.

When the screen is shown MAX, it means the highest temperature you have recorded. In the meanwhile, T1 is the highest temperature you set, T2 is the highest temperature that the sensor detected.

When the screen is shown MIN, it means the lowest temperature you have recorded. In the meanwhile, T1 is the lowest temperature you set, T2 is the lowest temperature that the sensor detected.

Easy to position:

• The flow meter can be placed anywhere within the liquid cycle.

Accurate monitoring and fast response:

• Transparent cover clearly shows the movement of the coolant.
• Sensitive probe provides most accurate water temperature
• Digital monitor shows water temperature and provides overheating warning alert.

Easy installation:
*The quick install connector of flow meter is suitable for tubing of ID9.5mm(3/8”)

Model Name:	Flow TX Plus
P/N:	CL-W0138
Dimensions (Main Body):	60 x 35 x 25 mm (H x W x D)
Quick install Connector:	For 9.5mm ID (3/8“) tubing
LCD monitor
Sampling Rate:	1 second
Range:	0°C to 90 °C 32°F to 194 °F
Resolution:	0.1 °C 0.1 °F
Accuracy:	±1°C ±2°F
Alarm Setting Range:	40°C ~ 90°C
Normal Status:	Blue Light
Alarm Warning:	Red Light
Weight:	140g