|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
201 users browsing
My Wish List
Who We Recommend
The Koolance HD-57 Hydra-Pak Dual Hard Drive Liquid Cooling Block is a double sided water cooling block that captures heat from the spindle motor and printed circuit boards of up to two IDE, SATA, SCSI, or SAS drives. The HD-57 allows any available nozzle diameter using its
Using Koolance's patented Hydra-Pakô soft cooler technology, the cooler's weight is substantially reduced while eliminating the need for thermal encapsulate required by earlier coolers.
NOTE: Depending on the nozzles chosen for it, the HD-57 water block may not work in all systems. If your chassis places the hard drive connections near a side panel (perpendicular to the front), make sure the selected HD-57 nozzles will fit.
Also the HD-57 needs 23mm between the hard drives.
The nozzles (fittings) are optional parts that you can configure in "Select Your Options" below.
Total Reviews: 2 Average Rating:
If I knew I wouldn''t put my money on it09-27-2014
Reviewer: Grisolia (2)
Seems to be a good idea but... The nozzles get in the middle of everything, it''s really hard to pipe them properly and find a good path for them after all. If you do the sandwich with two drives it gets much worse. If a sharp component in the drive circuit board punctures the thermal bag it will leak coolant inside your case and possibly short circuit the drive.
Good idea, bad execution06-22-2008
Reviewer: Jerry (15)
While the concept of this is great, the execution is poor. The fittings on the end of the unit are attached with a super glue type substance and break off really easy. I then tried epoxying them on and some held and some didn''t. Hopefully the next generation will be better.