The Feser Active UV Hose is designed specifically for water cooling systems. Feser Tube is a high-quality tubing that is capable of tight bends with out any kinks in the tubing. The hose is made of a special Polyvinyl Chloride (PVC) that makes it extra flexible and gives it an exceptionally smooth surface that doesn’t restrict liquid flow.

Additionally, Feser Tube features a large internal cross section making it ideal for high pressure pumps as it creates less back pressure, not restricting the flow rate and improving the pump’s lifespan.

The tubing features the distinctive “TFC – Feser Tube” logo every 800mm, which can be cut out if you don’t want to advertise the tube brand.

The Feser Tube features UV active tracers that cause the tube to visibly glow when Ultraviolet (UV) light hits the material in the house. A standard UV Cold Cathode (CCFL) tube or UV LED light works well with the hose.

Please Note: The tubing is sold by the foot. Quantity 1 equals a one foot length of tubing. Quantity 10 would be a 10 foot length of tubing.

Note: Tube holders shown in photos are not included.

Don't forget to pickup a Tube Cutter to make your job easier and cuts cleaner!

---

We advise to use similar colored Feser One Cooling Fluid to increase the glowing performance in slight transparent Hoses.









Measurements:
Outer Diameter (A): 3/4"
Wall Thickness (B): 1/8"
Inner Diameter (C): 1/2"

Smoothest Tubing In The World ! !

• PVC (Polyvinylchlorid) Material
• UV reactive properties
• 5 years uv stable
• Smooth surfaces inside and outside
• TFC – Feser Tube Logo applied every 800 mm
• Highly flexible

Durability
Break Tension:	10MPa (100 bar)
Bending Radius Max (%):	420%
Minimum Working Temp:	-30C
Maximum Working Temp:	+70C
Measurements
Inner Diameter (ID):	1.2" 12.70mm
Wall Thickness (WT):	1/8" 3.18mm
Outer Diameter (OD):	3/4" 19.06mm
Compatibility:	All 1/2" ID tubing systems using barbs

11-16-2008
Reviewer: Mr. Bond (6)
This tubing is the best I''ve ever seen by a long shot. It is ludicrously flexible, and has a smooth but non sticky texture that is perfect for a liquid cooling application. Under UV light, it glows red-orange, and in combination with TFC red coolant it looks marvelous! The color is a slightly off-red, which still looks good in my opinion. Highly recommended.

06-30-2008
Reviewer: JB (3)
As in my review of the Feser1 UV Black fluid, hte pictures and real life are not the same. The hose IS quite red in normal light, slightly less red than "Power Tool Orange" under UV cathode or 4000mcd UV LED. As advertised, the tubing is indeed very slick on the outside and NO GREASY FILM!! YAY! They did that part right! Also, as advertised, the hose is very difficult to kink. You can almost bend at a 90'' angle without having to worry about losing flow-rate. Color? not so much unless ur going for the industrial orange look. Performance and practicality? As advertised on all points. A FANTASTIC length of conduit! Would buy again in different color.

05-15-2008
Reviewer: Sephira Lutherinne (2)
In terms of Aesthetics and functionality its the best. I''ve used Primoflex tubing before and it is good but the sticky nature of the Primoflex Tubing makes it collect dust...Not so with this tubing it is extremely smooth on the outside and inside allowing for best flow rate ever and dust will NOT collect on the outside. Also this is the first time in my life that I have seen a UV Red product actually glows UV Red (slightly orangish but for the most part Red). Move Over Tygon (you kink master) a new king of tubing is here and his name is King Feser I.