The Feser X-Changer Triple 120mm Xtreme Performance Radiator is finally here after a very long development time, many patterns productions and dozens of test runs. Feser has developed a radiator that has no peers!

Feser only uses the best materials for their radiators. The fins and water channels consist of high-grade copper (e-Cu). The water chambers consist of a brass alloy. Feser paid very close attention to each detail, like ensuring that the layer of the black finish remains very thin, thus the heat-air transfer is optimized to a maximum. The G1/4" thread for the inlet and outlet of the radiator offers the highest compatibility for a wide variety of fittings. The radiators can be installed horizontally or vertically. For a vertical mounting the air can escape entirely from the radiator by using the bleeder screw.

The radiators have a distinctive "TFC - Xchanger" logo and after each radiator has been checked by the factory for impermeability and function, it it gets a hologram label with an individual serial number. This way you know that you have an original Feser Radiator.

Register your X-Changer Here!

• Fins made out of ECu Copper Material
• Brass Water Chambers
• Black Finish (5µm)
• G1/4" Threads
• Mounting Screws for Case (4/8/12)
• Mounting Screws for Fan (4/8/12)
• Silicon Pads (1/2/3)
• Bleed Valve Screw
• Stamped TFC – Xchanger Logo
• ColorBox Packaging
• Warranty Card
• Serial Number with Holographic Sticker
• Sealed in VCI Bag - 5 Years Corrosion Protection
• 3 Years Warranty
• Compatible with all available Waterooling Systems

Dimensions:	411 x 123 x 62 mm (L x W x H)
Color:	Black Finish
Fins Material:	High-Grade Copper (e-Cu)
Water Channels Material:	High-Grade Copper (e-Cu)
Water Chambers Material:	Brass Alloy
Thread Type:	G1/4"
Fan Mount Spacing:	15mm
Bleed Valve Screw:	Yes
Warranty:	3 Years

05-27-2009
Reviewer: Sir Pwn4lot (4)
I picked one of these up back in July 2008 to cool my QX9650. It was fairly expensive, but you get what you pay for, and more. It cools my QX9650 to 4.2GHz and still at about 40c on load, which is amazingly epic. Cools the same as my two triple black ice''s which I have pushed onto my GFX. My only regret is that I didn''t get the quad version!

04-15-2009
Reviewer: Stevemeister (3)
Keeps my Core 2 Extreme QX6850 at 22-24 deg C idle and eVGA8800GT at 35-37 deg C idle when coupled with 3 Noctua SPF12 ultra quiet fans. Phenomenal performance. Temperatures increase by about 3-4 deg C under load but drop down again real fast. Workd better than I could have imagined.

07-22-2008
Reviewer: mightygizmo (10)
this thing rocks! I was quite surprised by the cooling efficiancy of this radiator. it cools my qx9770 quad extreme w/ a peltier. didnt think it would cool the qmax 437 watt peltier but I was wrong after several days of testing with a 245 watt peltier I placed an order for the qmax. I get temps around 6 celcius with the lesser peltier and am getting return temps of only 96o ferh. cant wait till new peltier comes in. this is my first peltier/liquid cooled build and have been impressed with the results. still room to tweak Im sure

06-28-2008
Reviewer: eRazorzEDGE (8)
water flow in this thing is great as well as air flow across the rad. i have my X2 5000+ BE @ 3.3 GHz @ 1.45v it idles @ 30°C +/- 1° and never gets above 40°C. The tests against the thermochill will tell u that this thing doesn''t even break a sweat with just a cpu and the dual 120 X-Changer edges out the thermochill n a cpu loop.

bit-tech.net May 23rd, 2008