The Koolance HD-60 Hard Drive Liquid Cooling Block is a double sided block that captures heat from the spindle motor and printed circuit boards of one or two IDE, SATA, SCSI, or SAS drives. The HD-60 allows any available nozzle diameter.

The HD-60 is an all-metal water block, providing a thin profile of just 5/16" (8.5mm) for single or dual hard drive cooling. One bi-pack of thermal encapsulate is provided with the HD-60 for cooling a single hard drive.

A Second Hard Drive Kit is required if cooling two drives.

Note: The HD-60 water block may not work in all systems. If your chassis places the hard drive connections near a side panel (perpendicular to the front), make sure there is sufficient clearance for the HD-60.

Current Compatibility List

Download Manual

Model:	HD-60
Materials:	Stainless Steel
Port Threading:	G1/4"
Dimensions:	4" x 6.8" x 0.31" 102 x 173 x 85 mm (W x H x D)
Product Weight:	7 ounces 198 g
Components Included:	1x Cooling block mounting screws 1 x thermal encapsulate bi-pack 1 x manual

05-26-2009
Reviewer: ForNever (5)
While it''s a little pricey and installation isn''t exactly a breeze, this thing performs extremely well. I used it on only one hard drive for nearly a year and recently bought a "second hard drive kit" so the bottom of the cooler could also cool the top of my dvd burner. While I''m not sure if it will effect the life span of the burner, it sure is a lot cooler, wow. It should be noted that this is NOT intended to be installed in units with hard drive trays, although this type of mounting is surely possible with some custom holes drilled for the screws.

05-03-2009
Reviewer: Rudi (1)
I bought this and the add-on kit, and it really does a fantastic job on my 2 Raptors. Anybody who has these drives knows they tend to run on the hot side, but with this block They barely get warm. I will be getting a second block shortly.