The Lian-Li Silent Series PC-V1110 Mid Tower Case is an all aluminum case from the popularizer of aluminum designs, Lian-Li. Classified by Lian-Li as a Super Mid-Tower, the PC-V1110 features five 5.25" drive bays, each bay cover with its own air filter. The case has plenty of cooling with three integrated, speed controlled fans that can be adjusted using a switch on the case. Not to mention an attractive front door design that can be locked for extra security.

The case has all of the advanced cooling techniques and case features Lian-Li has been perfecting over the years. The hard drives and the power supplies are in a different cooling air flow than the other components, keeping the them from heating the processor and video cards. Nearly everything on the case can be taken manipulated tool-free and the case is designed to be as easy as possible for installing hardware. The video cards and other expansion cards are held in place by braces to avoid movement during travel. Anything that can be isolated from vibration via rubber mounts is. Cable routing is made easier via cuts in surfaces all over for cables to snake through. The I/O ports have been moved to the top of the case to ease access to them. The case even comes with wheels to allow it to be easily moved around!

The Lian-Li PC-V1110 is an exquisite piece of workmanship and a shining example as to why Lian-Li is one of the world's finest case manufactures. You would be hard pressed to find your computer a nicer home.

• Lian Li has more than 20 years experience, and continued to develop the new technology, the product quality and design is outstanding. Lian Li persisted to make product in Taiwan, and uses the most outstanding material as well as the most advanced technical manufacture in order to provide modern art high-quality goods.
• Lian Li put a lot of effect on the external finishing, all the external parts in hair-line brush anodized aluminum, and no sharp edges!
• 2008 All new V series, with new style, new structure, and better quality! No sharp edge inside the chassis, too. There are also protection kit to protect user’s hand and cables. When come to users’ safety, all the detail counts.

• Lian Li have always put a lot of effort on it's product with latest manufacture techniques. In some process, Lian Li still asserted in using hand craft to in certain steps in production. Because of some unique techniques can't be replace by machines, and it is how much effort Lian Li has put into it's product.
• User Interface is very important key in Lian Li chassis. The external fixture, user interface, and the internal structure all has been test to meet Lian Li’s high quality standard. 2008 Lian Li launched the all new PC-V1110, with all aluminum alloy chassis, round edge design with stylish look. PC-V2010 still have the hair-line brush anodized aluminum finishing and aluminum wheels for better mobility performance.
• It’s not about needing to be big, Nor about trying to be beautiful. The All new V series is the case which functionality and style converge. Open the side panel with the tool-less latch welcome you inside, the upright removable motherboard tray, anti-vibration HDD racks, 14cm silent intake fan with filter, top mounted multi-media I/O ports, and the graphics card holder have been redesigned – because when it comes to your comfort, every detail counts

• Rounded edge, unlike other chassis, using 2mm to 1.2mm thick aluminum panel formed to this unique design with hair-line brushed anodized aluminum metallic finishing
• PC-V1110 has multi-heat zones design to have better thermal solution and tidy up internal space.
• Huge internal space fits E-ATX motherboard, and graphics card which up to 395mm long, and room for 6 hard drivers, and a lot of internal space for liquid cooling system. Ideal for PC gaming system.

• PC-V1110 separated the system into two zones, allow better air flow for better silent performance.
• PC-V1110 using large size fans to improve the silent issue, there is a 140mm fan in the front and the 120mm fan at the rear feature low RPM with high air flow to get the best balance between silent and cooling.
• To reduce the noise, Lian Li designer fitted the anti-vibration rubber rings on the fan holder to absorb the vibration which cause the noise.
• There are anti-vibration kits fitted in the chassis to stop the vibration which cause the noise.

• PC-V series chassis has two heat zones, one zone for motherboard, graphics card and optical drives, and one zone for 3.5” HDD and power supply unit. To separate the heat sources for better thermal solution.
• Lian Li fitted a 140mm intake fan on PC-V2010, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It can be adjust by a three-speed fan controller, factory set to middle speed (980RPM), user can adjust to suit.
• The case front fitted with vented 5.25” bezels, allow the cold air to enter the chassis, there are air filter on the bezel to stop dust entering the chassis.
• There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis. It can be adjusted by a three-speed fan controller, factory set to Middle speed (1240RPM). User can adjust the fan speed to suit.
• PC-V1110 has equipped a three speed fan controller, user can adjust the fan speed to get the best balance between silent and cooling. factory setting to middle speed.(120mm:1240RPM; 140mm:980RPM) User can adjust the fan speed to suit.(120mm:1020~1240~1500RPM; 140mm:800~980~1180RPM)
• Where air enter the chassis, there is a need for an air filter to hold the dust.
• PC-V1110 fitted a washable air filter, it can easy remove from the fan unit, no tool required, and it is recyclable.
• There are vents for optional graphics card cooler, user can choose 120mm BS-03, or 140mm BS-06 to improve the cooling for graphics card.
• PC-V1110 equipped a vented PCI bracket, it can improve the cooling issue at the lower part of the motherboard.
• Today’s motherboards using heat pipe solution to solve the heating problem, therefore the all new V series change the motherboard back to up-right position, and there are opening on he motherboard tray allow to air to cool the rear of the motherboard.
• PC-V1110 fitted a 120mm fan on the graphics card holder to cool the memory and north bridge chip set. It can be adjust by the three-speed fan controller, factory setting to middle (1240RPM), user can adjust the fan speed to suit.
• Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.
• There are two openings on the rear of the top cover, for user who want to use liquid cooling system in PC-V1110. There are also two dust-free cover to cover up the openings.