Feser Limited Edition "Monsta" 420/360 Xchanger Triple 140mm Xtreme Performance Radiator

The Feser "Monsta" 420/360 Xchanger Triple 140mm Xtreme Performance Radiator has had a very long development time. Many patterns productions and dozens of test runs, but Feser has now developed a radiator unlike any other.

They only use the best materials for these radiators. The fins consist of high-grade copper (e-Cu); the water chambers consist of a brass alloy. They have to ensure that the layer of the black finish remains very thin, thus the heat-air transfer is optimized to a maximum. The G1/4" thread for the inlet and outlet of the radiator offers the highest compatibility for a wide variety of fittings. The radiators can be installed horizontally or vertically. For a vertical mounting the air can escape entirely from the radiator by using the bleeder screw.

The radiators have a distinctive "TFC - Xchanger" Logo directly stamped into the body, an easy way to know you are receiving a genuine Feser radiator. After completion each radiator is checked for impermeability and function. Only then does it get the hologram label with its unique serial number. Each radiator is a single piece. As a result, confusion or plagiarized almost impossible.

Note: The Monsta alone requires 1.2 liters of cooling fluid, please make sure you have enough cooling fluid to fill your system and this radiator.

Fins made out of ECu Copper Material
Brass Water Chambers
Black Finish (5µm)
Carbon Fibre Side Panels
G1/4" Threads
Double IN / OUT
2x Compression Fittings for Tubing 3/8" ID - 1/2" OD
2x Stopper Fittings
Feser Base Corrosion Blocker (50 ml)
Mounting Screws for Case (12)
Mounting Screws for Fan (12)
15mm Fan Spacing for 140 mm Fans
35mm Fan Spacing for 120 mm Fans
Silicon Pads for 140 mm & 120 mm Fans
Bleed Valve Screw
Stamped TFC – Xchanger Logo
ColorBox Packaging with Window
Warranty Card
Serial Number with Holographic Sticker
3 Year Warranty
Compatible with all available Waterooling Systems

EXTREME PERFORMANCE
Our newly developed technology and patented design brings you double the cooling power to your system. Better materials, the newest technology and a cool design promise an outstanding product.

NOISELESS - SILENT OPERATION
By using greater spaces between the copper fins the air flow rate is increased and gives you the option to use fans at a lower speed. The lower the speed, the lower the noise level.

HIGHFLOW OPTIMIZED
The radiators are especially designed to run with HighFlow system configurations. We recommend HighFlow Systems to maximize your heat dissipation.

MAXIMUM SYSTEM COMPATIBILITY
The radiator inlet and outlet ports are G1/4” threaded, helping to give you multiple fitting options. The X-CHANGER can replace any previous radiator you were using in your system loop.

PERFECT HEAT TRANSMISSION
The fins are made out of pure copper, which allows for the transfer of heat out of the water effectively and quickly due to the good heat conductivity of the material.

EASY INSTALLATION
Enough srews are provided to install the radiator properly. You can place the radiator wherever you want. The position (vertical / horizontal) will not effect the cooling performance.

ENERGY EFFICIENT
Due to the ability of using low speed fans, and less water resistance for the pump, the operating system saves energy consumption.

PATENTED DESIGN
This new designed radiator gives the opportunity to use inlet and outlet port from both sides and opens new ideas for installation. Now it is possible to use either 140mm or 120mm fans.

CARBON FIBRE TECHNOLOGY
The side panels are made out of real carbon fibre and decreases the weight of this huge radiator. Furthermore the panels give an astonishing look with the engraved top-notch monsta logos.