The Scythe Kaze Master Ace 5.25" 4 Channel Fan Controller / Temp Display features a VFD display with a black background for easier reading. The unit can monitor four temperature probes and control the speeds of 4 fans individually. It also has alarm that can activate due to fan failure or high temperatures and it can be configured by a jumper. The control knobs allow you to adjust the fan speed to your liking, even stopping a fan entirely.

• 4 Fans Controller and 4 Temperature Display.
• Passive Safety Alarm Feature is Build-In!
• Clear and Stylish VFD Display!

Fan Controller and Temperature Monitor Features

• Kaze Master is able to control and monitor up to 4 fans and 4 temperature monitor independently. These figures are displayed on VFD display.

Alarm Sound with Mute Function

• To safely monitor and run your system, Kaze Master comes with the alarm feature to inform the user in case of fan malfunction. Also if the temperature goes above 75C (165F), or in case of the temperature sensor failure, VFD display will blink the number “0” or “0.0” and trigger the alarm sound. You can even shut down the alarm sound by a simple jumper setting!

2-Way Temperature Display

• Both Celsius and Fahrenheit unit can be displayed by a simple jumper setting!

Fan Stop Function

• By turning the knob to counter-clockwise all the way, the fan can be stopped.

Wide Variable Voltage to Control Fans

• You can control fans between 3.7V – 12V to meet your needs for system requirement.
• By setting the voltage to the lowest level can silence your PC or turn it up to the highest to get the maximum cooling performance.

Model Name:	Kaze Master 5.25
Model Number:	KM02-BK (Black)
Manufacturer:	Scythe Co., Ltd. Japan
Dimension (W x H x D):	148.5 x 42.5 x 63 mm
Display Dimension:	114 x 20 mm
DC Input:	5V or 12V (From PC Power Supply)
Fan Adjustment Range:	3.7V (±10%) ~ 12V (±10%)
Fan Channels:	4
Maximum Fan Ampere per Channel:	1A per channel
Fan Speed Range:	0 ~ 7500 rpm (Display Range
Temperature Module Channel:	4
Temperature Range:	0 ~ 100°C / 32 ~ 199.9°F
Measurement Frequency:	Every 2 Seconds
Weight:	165 g

05-10-2010
Reviewer: Devil (1)
This was the first fan controller i have ever purchased and it turned out to be pretty decent, it works just as it is supposed to haven''t had a single problem with it yet. i''m running three Scythe Ultra Kaze 120 x 38mm Fans (they really need to have a fan controller, otherwise its like running a vacuum right next to your head every time you turn on your computer) and a stock 120mm fan on it and it can handle all of them no problem, it has actually pushed the Ultra Kaze''s past the 2000 rpm''s into 2100+ rpm when on full power. Pros: Clean interface, Sturdy design when installed correctly, Clear and bright display, reliable for up to four fans (including but not limited to Ultra Kaze 2000''s) Cons: if the power of the fans becomes too low there is a VERY loud audible beep when powered on (not necessarily a con but more so annoying), Semi difficult to install for a first timer, TONS of cords, difficult to apply thermal sensors if computer is pre-built without some disassembly. All in all this controller does what it sets out to do and does it well. If you can handle all the cords and install it correctly then it''s definitely worth the money.

02-24-2010
Reviewer: Chris (3)
Thing coems with epic gods amounts of cords, the only ez plug to plug in is the power and temp propes, The fan area in general is all excaberating!hard to plug in, and dont cross wires on fans just becouse your lazy and dont want to take out the fan to flip it, it will kill the fan controlers on this thing. Works perfect tho, wished it had buttons instead of jumpers on back, but possibilites to mod in ur own