The Lian-Li PC-7FWB Advanced Mid Tower Case is a full aluminum case with all of Lian Li's latest innovations in easy installation and use. A huge side panel window shows off your computer's hardware in all their glory. The I/O ports and control buttons are located on the top of the case, making it optimal for floor placement. The chassis is ventilated using a huge 140 mm intake fan and a large 120 mm exhaust fan. Nearly everything involved with installing components is tool-less, from the 5.25" drive bays and 3.5" HDDs to the expansion cards and power supply. As always, Lian Li has also focused on making this case as quiet as possible - low speed, low noise fans and vibration reduction in nearly every capacity - from the side panels to the HDD mounts themselves. Lian Li continues to innovate and excel in case design, the Lian-Li PC-7FWB Advanced Mid Tower Case is another shining example!

The Ultimate Workmanship

• Lian Li has more than 20 years experience, and continued to develop the new technology, the product quality and design is outstanding. Lian Li persisted to make product in Taiwan, and uses the most outstanding material as well as the most advanced technical manufacture in order to provide modern art high-quality goods.
• Lian Li put a lot of effect on the external finishing, all the external parts in hair-line brush anodized aluminum to keep the metallic look, all chassis with no sharp edges! To ensure the user's safety!
• PC-7F has a new structure chassis, it is simple, elegant, easy to use, and modify. Tuned for today's new hardware requirement.

Fine Design

• Lian Li have always put a lot of effort on it's product with latest manufacture techniques. In some process, Lian Li still asserted in using hand craft to in certain steps in production. Because of some unique techniques can't be replace by machines, and it is how much effort Lian Li has put into it's product.
• User friendly is very important key in Lian Li chassis. The external fixture, user interface, and the internal structure all has been test to meet Lian Li’s high quality standard.
• PC-7F has folded edges, and all the shrpe edge has been removedto protect user's hand!

Fine Craft Products

• Minimalism Style, unlike other chassis, Just Simple and Clean shape! Using 1.5mm to 1.2mm thick aluminum panel formed to this unique design in hair-line brushed anodized aluminum metallic finishing, with freedom to setting up the hardware layout.
• The modularized parts can be removed, and more freedom for user who want to modify the case to suit their needs
• PC-7F have very simple and functional thermal design, intake the cold air from the front, and exhaust the hot air at the rear.

Silent Performance

• To make the system silent, and at the same time, to keep it cool, PC-7F features a 14cm ball-bearing fan which runs at 900RPM, to input big volume of air flow, and runs silently.
• There are a jointer for join the front panel to the chassis, for easy removment and attachment of the front panel. And it will also low the vibration noise.
• Lian Li designer looks into detail, PC-7F has equipped anti-vibration kit on the chassis, to absorb the noise. Like the EMI spring on the top cover, it absorb the vibration, and the side panel still easy to remove and close.
• Chassis with anti-vibration kit.
• The anti-vibration spring on the chassis, it push the side panel to against the chassis, reduce the gap between the side panel and the chassis, to reduce the vibration noise level.
• PC-7F features Lian Li patented Anti-virbation HDD cage, which allow user to fit three of 3.5" HDD. It is easy to use, no tool required, simply using the special thrumb screw to secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage.

Thermal Solution

• There is a 140mm ball-bearing intake fan to input cold air into the chassis, and it only runs at 900RPM, it can move alot of air volume, and silent. There is also a washable air filter in front of the intake fan to stop dust enter the case.
• There is one 120mm exhaust fan at the rear of the chassis, it runs at 1000RPM, silent and still can move a good volume of air.
• PC-7F supports liquid cooling system, there are two holes for water tubes, and covered with rubber cover.
• The PCI bracket with vent holes for extra cooling to PCI add-on cards, and there are vents for optional graphics card cooler.

Friendly Design

• PC-7F's top cover can be removed, simply unsecure four fixing screws, the top cover can be removed, Ideal for modding project!
• PC-7F's front panel can be easy remove, and all the switech and wire are mounted on the chassis, therefore user won't pull out the cable while remove the front panel.
• Install HDD is easy! Simply put the HDD into the carrer, no tool required! And it also features Lian Li patented Anti-Vibration System.
• Hugh internal space for power supply unit, there are anti-vibration rubber strips to reduce the noise.
• Multi-media ports’ connectors follow international specification standard, with one connector for easy installation
• Audio supports HD Audio and AC97 Audio design for batter compatibility
• All I/O ports on the top cover, allow for easy access, there is also a dust-free cover to protect these connectors.
• Tool-less design for the Optional drive, just slide the drive into the 5.25" bay, and mounting kit will hold the drive in position, user can add screw to the drive for extra security.

Model:	PC-7FW
Case Type:	Advanced Mid Tower
Dimensions:	210 x 450 x 490 mm (W x H x D)
Front Bezel Material:	Aluminum
Side Panel:	Transparent Window
Body Material:	Aluminum
5.25" Drive Bay (External):	5 (one for 3.5 inch converter)
3.5" Drive Bay (External):	1
3.5" Drive Bay (Internal):	4
Expansion Slot:	7
Motherboard:	ATX M-ATX
System Fan (Front):	140 mm at 900 RPM
System Fan (Rear):	120 mm at 1000 RPM
I/O Ports:	2 x USB 2.0 1 x IEEE 1394 HD+AC97 Audio