Introducing the RX360, the highest performing triple fan radiator XSPC have ever released. At close to twice the thickness of the RS series radiators it has excellent cooling capabilities and the sub 8fpi gives the radiator very low air flow resistance. The RX360 has been designed and optimised for low speed fans so it can offer high performance cooling at very low noise levels

Note: Barbs NOT included!

Warning!! Please check screw length before installing to ensure they are the proper length for your application. RMAs for radiator damage due to improper installation with not be authorized!

• Black Gloss Finish
• Copper Tubes and Fins
• 3 rows of 13mm by 2mm Tubes
• Sub 8fpi (fins per inch)
• G1/4" Ports
• 6-32 Case and Fan Screws

Dimensions:	125x58.5x410mm (WxDxH)

09-09-2011
Reviewer: Midwest (6)
It has solid build with no trouble installing the fittings. Oddly, I havent had any flux or grim coming from this either during the initial flush or since installing it. I bought this based on rather objective assessments on forums and articles. System: i7 870 (OC to 3.5ghz); gtx 560 ti MCP35x (PWM but idles at 1300 rpm) Fans: gentle typhoons: 2 1150rpm and 1 1450rpm. At idle, components run at 27-30C. Can''t wait to see what it does on load.

06-05-2011
Reviewer: hian (4)
Have this to cool my OC''ed 2600k at 1.39V, max temp is only at around 70c at 100% load (water temp around 36c). Malaysia, non-air-cond room.

05-08-2011
Reviewer: Jman (1)
Quite the nice rad. Build quality is great, it feels nice and solid in your hands. Matte black finish. The fitting ports are nicely machined, solid threads, nice and smooth. Nicest thing, is, obviously, the low FPI count. However, to still offer the performance, its nearly double the thickness of some more "standard" rads. Just keep that in mind. Im using it to cool only my CPU for the moment, a Phenom II X4 965, which Ive got overclocked to 4.2ghz, from 3.4ghz. Using Gelid Wing fans, push only, she idles as 30C, games at 35-38, and full load from a 26hr Prime95 run is 40C. You could say that I am quite pleased with this rad. I plan to add to GPU''s and a Motherboard block to my loop, and Ill be using these Rads. 3 of them all together, in a DD rad box, for a wonderfully silent, high performance loop. Highly reccomended if you''re looking for a 360 rad.

08-22-2010
Reviewer: marine73 (2)
Bought a Black Ice 360 radiator first and then found out it doesn''t work well with low speed fans due to the high "fins per inch" spec. Measured @ approx 14/inch which requires a fairly high speed fan to get the air through. This XSPC unit is only 8 fins per inch and so it performs much better with the lower speed (read quiet) fans. Also 20-30 bucks cheaper than the equivalent competition. The only thing is the mounting holes on my unit were 6-32 vs. the 4mm which the spec says. No biggie, just an FYI. Would definitely purchase one of these again.

02-06-2010
Reviewer: jphet39 (1)
Fits perfectly on the CM HAF 932 inside on top. It keeps my CPU i7 920,EK 5870 waterblock, and EK NB temperature 30-33c at no load. When gaming at full load it was still below 40c. Very happy with the results and will get 1 more for a customer''s build.