Optimize your radiators performance with the Tecnofront AirBox 360 - Acrylic. By channeling the airflow at an even distribution over the surface of the radiator your performance with increase. This helps eliminate the dead zone most fans have at the center of the fan.

Material:	Plexiglass
Radiator Compatibility:	Triple 120mm (15 mm spacing)
Contents:	12 x stainless steel screws M4X35 (fan) 12 x stainless steel screws M3X5 (radiator) 12 x stainless steel screws M4X5 (radiator) 12 x threaded inserts preassembled

11-19-2011
Reviewer: Greg (1)
as said below, the end pieces do not fit.. I would think the least they can do for a $25 product is make its own pieces fit, they''re very easy to file down

05-06-2011
Reviewer: Von Waffle (1)
Air Box walls installed with no problem, however.. Getting the air doors (end pieces) to fit was extremely difficult. The door insert tabs were signifantly bigger than the insert holes on the walls. Forcing them to fit slightly cracked a corner of the wall (had to use clear packaging tape to cover cracked corner). As far as performance, there is an increase. I recommend the Air Box just make sure you have a dremel to file down the insert tabs.

07-24-2010
Reviewer: munchkin (1)
Device of this nature really make a difference as they allow for the entire radiator to receive airflow. Once I had to fabricate these devices by hand but now I don''t have to. The fitments of the tabs is not really an issue, the tabs are supposed to be tight. A little tricky to assemble perhaps but they don''t come apart either. An (arguably) better way is to attach the end pieces with screws (complicates manufacturing and hence raises price). My quibble is that I do not like the usage of the press fit knurled fasteners. These the knurls are what actually keeps the fan in place. Some other fastener should have been used. One workaround is to press fit from the other direction. If so, the interference fit of the knurls will not all that holds the fan in place. If reversed the holes in the fan will need to be slightly increased in diameter which means that the fans will be dedicated to the box and you will need to use the long screws that are provided. Not that big a deal though.

04-24-2010
Reviewer: IronZ (1)
The only problem I had with the unit was that the slots for assembling the end pieces were too small. They should be tight yes, but mine just would not go in. It was a simple fix with a small file and all is well. Personally, I like the airbox better than 3 different shrouds. It looks cooler too :)

01-28-2010
Reviewer: Steve (1)
This unfortunate fact was nowhere in the spec or product description. Those with rads having 25 mm spacing like mine will find this unusable.