Optimize your radiators performance with the Tecnofront AirBox 120 - Acrylic. By channeling the airflow at an even distribution over the surface of the radiator your performance with increase. This helps eliminate the dead zone most fans have at the center of the fan.

Material:	Plexiglass
Radiator Compatibility:	Single 120mm
Contents:	4 x stainless steel screws M4X35 (fan) 4 x stainless steel screws M3X5 (radiator) 4 x stainless steel screws M4X5 (radiator) 4 x threaded inserts preassembled
Dimension Height:	45mm

08-17-2011
Reviewer: Silent54 (13)
The only pro for this airbox is that it does lower my cpu temp a little. The cons: 1. Very poor quality and construction. You have to force this thing together and pray something doesn''t break, one of the two I bought did. It doesn''t piece together like the product pictures show. I had to use a small wood clamp and flat tip screwdriver to pry the side panels into place. Once put together, there are quite a few gaps between the fan/airbox and airbox/radiator. 2. I bought two of these and out of the two bags of screws, I could only use four. None of them would fit my radiator or they weren''t long enough the bridge the gap between airbox and radiator. 3. Every panel on both airboxes were scratched up refer back to con 1. My advice is to buy a different airbox. These aren''t worth the $15 and frustration.

04-10-2011
Reviewer: Anonymous
I wanted to have a little bit of play with my H50 hoses, and thought that this would give me some play, so that the pump/cooler would not have stress. Boy I was right! This thing not only works but is the biggest spacer/shroud out there.Do your reasearch on dimensions, worked out in favor of what I needed!