The Thermaltake Armor Plus Steel Full Tower Case with Side Panel Window is a massive case with seven 5.25" drive bays, seven internal 3.5" drive bays and ten expansion slots - easily handling quad-graphics card solutions! This solid case is designed with the extreme builder in mind - everything is designed for easy installation and plenty of room.

From a sliding motherboard tray to specific thermal management for the CPU, VGA and Hard Disc Drives each to even an integrated tool box in the top of the case. The case is designed with easy cable routing and can handle all ATX motherboard systems. It has easy to reach controls and I/O ports at the top of the case.

Cooling is a central theme to this case, starting with a massive 230mm fan on the side panel. The front and rear of the case are exhausted using 140mm fans and the rest of the case is handled easily with an assortment of 120mm fans.

This is an undoubtedly feature heavy design - it excels in giving the user many options and making installation and operation a breeze. If your are looking for a case that can handle more hardware than is reasonable or even sane - the Thermaltake Armor + (Plus) Full Tower Case is a very good choice!

Custom Case Painting Service:
Interior Support Chassis Powder Coating is a service where we'll take a case of your choice, disassemble it, clean it and then powder coat its internal surfaces and supporting chassis leaving only the top panel, side panels and front bezel untouched. This makes a very cool looking two-tone color for your case and makes the interior as interesting as the exterior!

Powder Coating is unique painting process that provides a much smoother and thicker paint surface without any risk of drips or running. Once the case has been completely disassembled (including drilling out of the manufacturer's rivets) the internal chassis parts are separated and cleaned. Each of the parts in the chassis internal support structure are then coated with paint powder using an electrostatic gun. The gun charges the particles so they stick to the surface the part without any solvents or other binder chemicals. The coated part is then baked in an oven so the powder melts in a uniform film of paint. Once every part has been baked and cooled, the case is reassembled, rivets and all, and shipped out.

Powder Coating Service Includes:

• Disassembly of Case
• High Quality Powder Coating Applied to Each Interior Support Chassis Part
• Reassembly of Case

Please Note: Powder Coating Service Takes 2-3 Weeks Prior To Shipment.

Note: The color in the photos is Blood Red. Please be sure to select your preferred color in options below.

• Optimized design for both liquid cooling and air cooling system
• Sliding hood with toolbox on top. (Upgradable to LCS.)
• 10 PCI slots design for quad-graphic card configuration
• Tool free design for 5.25” device and PCI slot.
• Sliding motherboard tray
• Independent thermal management for CPU, VGA & HDD.
• Cable management system for better cable routing and internal air flow
• Evolutionary adjustable PSU supporting bridge
• MicroATX, ATX, Extend-ATX supported

HDD Air Cooling System
HDD (intake):	140 x 140 x 25mm blue LED fan, 1000rpm, 16dBA 120 x 120 x 25mm fan
VGA Air Cooling System
Front (intake):	140 x 140 x 25mm fan 1000rpm, 16dBA or 120 x 120 x 25 fan
Bottom (intake):	Two 140 x 140 mm fans or Two 120 x 120 mm fans
Side (intake):	230 x 230 x 20mm blue LED fan, 800rpm, 15dBA
CPU Air Cooling System
Rear (exhaust):	120 x 120 x25 mm TurboFan,1300rpm, 17dBA
Specifications
Model:	VH6000BWS
Case Type:	Super Tower
Dimension (H*W*D):	600 x 245 x 625 mm (23.6 x 9.6 x 24.6 inch)
Net Weight:	16.8kg(37.0lb)
Side Panel:	Transparent window
Sliding Motherboard Tray:	Yes
Cable Management:	Yes
Sliding hood:	Yes
Adjustable PSU bridge:	Yes
Material Front door:	Aluminum/ Chassis
Color:	Black
Motherboards:	9.6” x 9.6” (Micro ATX) 12” x 9.6” (ATX) 12” x 13” (Extend ATX)
Drive Bays:	5.25" - 7 3.5" - 1 (converted from 5.25" 3.5 (hidden) - 7