The radical long-fin design of ARCTIC RC PRO notably increases the surface area for efficient heat dissipation. Together with the highly conductive pre-applied thermal tape, the ARCTIC RC PRO reduces the RAM temperature significantly. Using the RC Turbo Module will enhance the cooling performance further - an outstanding thermal radiation every overclocker is looking for!

Following the design concept of the award-winning ARCTIC RC, this Pro version also features long aluminium fins as well as highly conductive thermal pads. The fins are extended to 5cm which lead to a significant increase in heat transfer area and optimized natural convection.

The pre-applied thermal pads efficiently draw heat out from the RAM to the fins. The ARCTIC RC PRO is securely assembled by 3 screws. By giving high pressure to the two heatsinks, thermal pads will firmly lay on the modules for best heat dissipation.

While a generic heat spreader has only limited cooling effect on the RAM, the ARCTIC RC PRO powerfully lowers the temperature by 50%*. Such unparalleled temperature reduction extends the RAM service life and boosts overclocking to a new level.

User-friendly design
Installation is easy and can be done in just two minutes. The packaging is precisely designed for positioning the RAM accurately on the ARCTIC RC PRO. After fastening 3 screws, users can start enjoying the improved RAM performance brought by this revolutionary cooler.

The ARCTIC RC PRO is compatible with single or double sided DDR2 and DDR3 SDRAM modules. It is also compatible with the RC Turbo Module – an add-on cooler with two 60mm fans for those who are looking for extreme RAM overclocking.

• High thermal efficiency
• Optimized for natural convection
• Maximizes overclockability
• Pre-applied adhesive thermal tape
• Applicable to single and double sided modules
• Lightweight; transport safe
• Easy installation

Dimensions:	126 L x 1.5 W x 76 H (mm)
Weight:	74g
Material:	Aluminum
Warranty:	6 year
Contents:	2 Pieces Arctic RC Pro Front and Back Side
Application:	1 Stick RAM

01-25-2013
Reviewer: Joe (2)
The kit I received contained parts for ONE stick of RAM, not two as the other review suggests. With that out of the way, I do like the cooler.

11-23-2012
Reviewer: Minston (2)
To protect my RAM from overheating, I brought this ram cooling fence. I am a heavy gamer. Once my system suddenly shut down when I play my game for consecutive 5 hours. When I check the PC and finally find out that one of my rams burned out. Just can not believe that it would be that hot while gaming. . I consult my friends, then he recommends this pair to me. ARCTIC is well known for CPU cooling and VGA cooling product. But I am not sure whether they will do a good job in ram cooling until I install this pair to my board. This ram cooler is Well-made, good quality and well-designed. You do not bother to read the instruction manual. Installation is initiative. Very easy to fit - the packet acts as a template. 4 pieces, with one going on each side of the RAM module, so enough for a pair of RAM modules. The idle tem of the ram area drop sharply from 52 to around 40, 7 degree drop, unbelievable.

05-21-2012
Reviewer: Nog (5)
Apposé sur des Corsair Gt légèrement Oc, la température a baissé d''environ 6°C