The Danger Den Double Wide Tower 21 Black-Series Acrylic Case expands on Danger Den's original black series case to create a massive acrylic home for your components. This case has the capacity for housing up one quad 120mm radiator, two triple 120mm radiators and two dual 80mm radiators - all at the same time!

The case is constructed of high quality acrylic panels and all necessary screws and fittings are included. The split internal layout places your motherboard on one side and the power supply on the other, helping isolate the board from the power supply's heat. You will not be wanting for space in this case, there is room for mounting just about anything - effectively, you have two mid tower cases merged into one. As with all of Danger Den's acrylic case, the panels are crystal clear, allowing viewing of each and every component - an excellent choice for showing of your rig to the adoring fans.

Note: Only one momentary switch is included and it can be used as either a power or reset switch. For another switch that fits the case, check out our 22mm Momentary Switches category.

Now available with SR2 extension! Optional SR2 Extension increases the depth of the case to 20" with a 10-slot I/O shield. Allows use of SR2 or EATX mobos with front mounted Radiator and Fan!

Note: Please allow 3-5 days for shipping.

Excellent Liquid Cooling Support
With 14 fan holes, this case actually support 5 radiators simultaneously! That's one quad 120mm radiator, two triple 120mm radiators and two dual 80mm radiators.

Beautiful Two-Tone Acrylic Paneling
The Black Series cases feature black paneling for support and crystal clear side paneling with accentuating colors for ultimate attention getting capability.

Chassis Features

• Strong and Durable Acrylic construction
• 80mm fan mounting location for hard drive cooling (fan purchased separately)

Dimensions:	586.74 x 372.11 x 422.91 mm 23.1 x 14.65 x 16.65 in. (H x W x D)
Color:	Several color options are available
Motherboard:	Standard ATX E-ATX (Not all Rads will fit with E-ATX support)
Powersupply:	Supports ATX PSU
3.5" Internal Drive Bays:	Optional
5.25" External Drive Bays:	Optional
Quad 120mm Radiator Support:	(Optional)
Triple 120mm Radiator Support:	(Optional)
Dual 120mm Radiator Support:	(Optional)
120mm Fan Holes:	10 x 120mm(Max) 4 x 80mm(Max)
CPU Cooler Clearance:	177mm (approx. 7")

04-08-2011
Reviewer: adam (11)
This case is freaking huge. But it''s a good thing if you have alot of water cooling parts. It can support 2 360 rads and 1 480 rad. And has so much room for everything else you need. Only bad thing is sense you can see both sides you have to get real creative with wire management. Make sure you get loads of cable sleeving for it all. I used 2 kits to do all the fans and other parts. Get it if you want a monster water cooled rig.