The ThermalTake TR2 Power 500W Power Supply is a solid, contemproary design that helps saves power. It has large 120mm fan that increases air supply within the enclosure.
Intelligent cable management aids airflow by sleeving together multiple cables, opening up the airflow. This allows your PSU to run at its most efficient levels for long durations with decent power consumption.The power supply comes with one Main connector (20 + 4 pin), one 12V (P4), multiple PCI-E, six peripheral, five SATA, and a Floppy connector, which will enable you to attach multiple drives/cards to your motherboard without worrying about your PSU.

• ATX 12V V2.2 enables most reliable and robust power delivery.
• Selectable 115 / 230V AC input voltage for different country.
• Supports all Intel & AMD processors.
• Supports all Nvidia & ATI/AMD graphic cards.
• Ultra silent 120mm fan with intelligent RPM control guarantees cool performance and silent operation.
• More than 72% efficiency at typical load operation.
• High reliability: MTBF>100,000 hours.
• Built-in industry grade protections : Over Power, Over Voltage, Over Current and Short Circuit Protection.
• Safety / EMI Approvals: UL/CUL, FCC, BSMI certified.
• Dimension (W/H/D): 150mm x 86mm x 140mm.

Voltages:
OUTPUT:	Max. Load
+5V:	15A
+3.3V:	24A
+12V1:	25A
+12V2:	25A
-12V:	0.5A
+5VSB:	3A
Specifications:
Wattage:	500 Watts
Fan:	120mm Fan
Efficiency:	65% +
Hold-Up Time:	17 ms
Switches:	ATX Logic on-off additional power rocker switch
Motherboard Connectors:	24-pin Main Connector 4+4-pin Power Connector
Power Good Signal:	100-500 ms
Form Factor:	ATX 12V 2.2
Dimension:	5.5 x 5.9 x 3.4 inch (L)X(W)X(H) 140 x 150 x 86 mm (L)X(W)X(H)
Warranty:	5 Year
AC INPUT:
Input Voltage:	100 VAC ~ 230 VAC
Input Current:	7A/11A
Input Frequency Range:	50 Hz ~ 60 Hz
MTBF:	100,000 Minimum
RFI / EMI:	UL/CUL, FCC, BSMI
ENVIRONMENT:
Operating Temperature:	10°C; to 25°C;
Storage Temperature:	-40°C; to 70°C;
Operating Humidity:	20% to 85%, non-condensing
Storage Humidity:	5% to 95%, non-condensing
Cables
20+4 pin:	1 (500mm)
ATX 12V 4+4 pin:	1 (500mm)
Molex & FDD:	3 x Peripheral & 1 x FDD (500mm + 120mm + 120mm +120mm) 3 x Peripheral & 1 x S-ATA (500mm + 120mm + 120mm +120mm)
SATA:	4 x S-ATA Connectors (500mm + 120mm + 120mm + 120mm)
PCI-E 6+2 pin:	1 x 6+2pin + 6pin PCI-E Connector (500mm + 120mm)