The Lian-Li Tyr PC-X100 Super Full Tower Case is a radical departure from normal case design in as it mounts the drives on the side panels of the case. The case has three distinct cooling zones and pulls air in through a cleanable filter. Everything is designed for easy installation, including a removable motherboard tray, power supply tray and hard drive cages.

We just took the case and added a HUGE window to the side and bolted that bad boy on! Now you can have all the performance gains of the Tyr series chassis and the looks of a large windowed side panel.

Custom Case Painting Service:
Interior Support Chassis Powder Coating is a service where we'll take a case of your choice, disassemble it, clean it and then powder coat its internal surfaces and supporting chassis leaving only the top panel, side panels and front bezel untouched. This makes a very cool looking two-tone color for your case and makes the interior as interesting as the exterior!

Powder Coating is unique painting process that provides a much smoother and thicker paint surface without any risk of drips or running. Once the case has been completely disassembled (including drilling out of the manufacturer's rivets) the internal chassis parts are separated and cleaned. Each of the parts in the chassis internal support structure are then coated with paint powder using an electrostatic gun. The gun charges the particles so they stick to the surface the part without any solvents or other binder chemicals. The coated part is then baked in an oven so the powder melts in a uniform film of paint. Once every part has been baked and cooled, the case is reassembled, rivets and all, and shipped out.

Powder Coating Service Includes:

• Disassembly of Case
• High Quality Powder Coating Applied to Each Interior Support Chassis Part
• (This Includes Applicable Accessories Selected As Well)
• Reassembly of Case

Note: Pictures shown in "Candy Red" & "Ink Black", be sure to select what color you want in the options below.

Lian Li - The Ultimate Craft

• "Quality" is always the essence of Lian Li's products since 1998 when Lian Li offered the first all aluminum chassis to the market. Since then, Lian Li exemplifies the same quality standards, ensuring durability and craftsmanship come first. All products are manufactured in Taiwan and distributed to worldwide markets.
• Lian Li put a lot of effect to bring out the quality of our products, there are hair-line brush finishing and with anodized on aluminum surfaces, and all the sharp edges has been removed.
• In 2009, the new TYR X series, with new style, new structure, and better quality! There are also protection kit to protect user’s hand and cables. When come to users’ safety, all the detail counts.

LIAN LI - Excellent Design

• User Interface is very important key in Lian Li chassis. The external fixture, user interface, and the internal structure all has been test to meet Lian Li’s high quality standard. 2009 Lian Li launched the �new TYR series, PC-X1000, with all aluminum alloy chassis, round edge design with stylish look. PC-X1000 has hair-line brush anodized aluminum finishing.
• The cutting edge tool-less design is an important key feature in 2009 Lian Li cases. Lian Li designer considered end user requirements, like those who need to build systems faster, or swap out components often. The brand new tool-less modules can make Lian Li users’ life much more convenient.
• The new TYR series, PC-X1000 is the case which functionality and style converge.Open the side panel with the tool-less latch, the removable motherboard tray, HDD racks, 3 x140mm silent intake fans with filter, top mounted multi-media I/O ports, and the graphics card holder have been redesigned – because when it comes to your comfort, every detail counts.
• TYR PC-X1000 has multi-heat zones design to have better thermal solution and tidy up internal space.
• The new TYR PC-X1000 is a Full-tower case, which is ideal for the latest graphics cards in combination with the best thermal dynamics. All the internal installation can be done without tools, and is easily adjustable to optimize your hardware setup. Especially in the advent of adding in new graphics cards, equipped with 8 PCI slots, can hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.
• The new internal layout has the motherboard on middle level, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. To install the power supply unit, just slide the power supply unit throguh the opening at the rear of the case, and there are room for 180mm long power supply. If user need more space, there is a power supply extension kit.
• There are two aluminum handles for 2.5" HDDs on the middile level, allow user to install or remove 2.5"HDD easier.�and then also absorb and reduce vibrations.
• The new TYR PC-X1000 is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front 140mm intakes fan runs at 1200RPM, and the rear 140mm fan extracts the hot air out at 1200RPM.
• The fans are mounted with Lian Li’s anti-vibration fan mounting system; the rubber ring grommet absorbs the vibration, keeping the case silent.
• The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After closing the mounting bar, the rubber pad pushes and holds the 5.25” device in position to both secure and absorb vibration from the device.
• The aluminum PCI tool-less mounting module is equipped with a rubber pad which can hold the graphics card firmly while closing the gap found in the PCI bracket and PCI slot to reduce noise from escaping air and furthermore reduce vibrations.
• TYR PC-X1000 features Lian Li patented Anti-virbation HDD cage, which allow user to fit seven of 3.5" HDD. It is easy to use, no tool required, simply using the special thrumb screw to secure the anti-vibration rubber ring to the HDD, and slide the HDD into the cage.
• Huge internal space for power supply units, there are anti-vibration rubber strips to reduce the noise

Thermal Solution

• TYR PC-X1000 features multi-heat zone design, upper zone holds two opticals, one floppy and three HDDs. Middle�zone holds the motherboard and lower zone has a power supply unit and three HDDs. to separate the heat sources for better thermal solution.
• The two 140mm fans on the top cover and the 120mm fan at the rear exhaust the hot air out from the system. The fans cover the whole motherboard, and they can remove the heat fast
• There is a 140mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis.
• There are vents on the PCI slots, provids extra cooling to graphics card.
• The power supply unit is at the bottom of the case. It can draw in cold air directly through the vent below the power supply unit. This cooler, fresh air will keep your PSU components more cool and stable and thus extend the PSU lifecycle.
• TYR PC-X1000 supports liquid cooling system, the two holes at the rear of the case allows water tubes to pass through, and the rubber cover can protect the tubes away from cutting.
• TYR PC-X1000 has fitted a three speed fan controller, user can adjust the fan speed to get the best balance between�silent and cooling.
• User can easily add the copper radiator (option kits) with the front fans, build the better cooling system for your TYR PC-X1000.

Model:	TYR PC-X1000
Case Type:	Super Full Tower Chassis
Dimensions:	230mm x 680mm x 430mm ( W, H, D)
Front Bezel Material:	Aluminum
Color:	Exterior Black Interior Optional
Side Panel:	Aluminum w/ Full Size Bolt-On Window
Body Material:	Aluminum
5.25" drive bay (External):	3
3.5" drive bay (External):	0
3.5" drive bay (Internal):	6
Expansion Slot:	8
Motherboard:	M-ATX ATX
System Fan (Front):	140mm Ball-Bearing Fan x 3 (1200RPM)
System Fan (Rear):	140mm Ball-Bearing Fan x 2 (1200RPM)
I/O Ports:	4 x USB 2.0 1 x IEEE1394 1 x E-SATA HD+AC97 Audio