 |
135 users browsing
|
| Tygon 2475 Ultra Chemical Resistant Plasticizer Free Tubing - 1/2" ID (3/4" OD) - Clear (ACG00038) |
| Part #: ex-tub-665 |
|
|
Price: $5.50
|
 |
Click image to view |
|
|
|
 SHOPPING CART
 PRODUCT LINKS |
Average Rating:  |
Results: 1-4 of 4 |
 Very Dissappointed
Reviewer: Leonard (1)
Be warned before buying this tubing, it is unbelievably stiff, and comes horribly bended. Also, for some reason, it''s so tight on the inside as well. All of my 1/2" ID x 3/f" OD fittings were so tight, that the tubing literally slips right off after struggling to get it on, which is a problem anyways because of the tubing being bent from I guess packaging. If you try to unbend it, it kinks and leaves marks as stated by the top comment, because it is so stiff. I will be looking for different tubing, oh and good luck getting a perfect cut with scissors.
 Sturdy, but kinks
Reviewer: FadedMaster (14)
Definitely sturdy and durable. You''ll need a tubing/PVC cutter to get clean cuts. But be aware that this does not have that great of a bend radius and when it kinks, you will see a mark in the tubing where it kinked.
stiff, harder to cut
03-02-2011
Reviewer: flatsixdc (22)
Much stiffer than the Feser tubing. Not sure if that''s good or bad, but I don''t really like it. And it''s a bit cloudy. If you want crystal clear tubing, this isn''t it. And when you cut it, the material kinda chunks--it does not slice cleanly, even with razer-sharp cutters. In fact the "tube cutter" that I bought from FrozenCPU could barely get through it.
 very good tubing....
Reviewer: xDiZtUrBeDx (5)
so far I like it a lot looks great is very ridged compared to the stock hose that comes with swiftech cooling system but still makes the bends and doesn''t kink at all! its well worth the money!
|
 |
45977 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
