Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 10-6, Sat 11-4 55805 fans like us! Bookmark and Share


56 users browsing
Become a Fan on Facebook Follow FrozenCPU on Twitter Subscribe to our RSS Feed







Swiftech H240-X Expandable All-In-One Liquid Cooling Kit
Part #: ex-wat-334
  
Price: $149.99
 Click image to view


 Click on image for larger view


SHOPPING CART
Your Cart is Empty
PRODUCT LINKS

Average Rating: Results: 1-2 of 2

Great product gets a 5 star in performance
01-14-2015
Reviewer:David (2)
Awesome product! I got this just the otherday to cool my intel i7 4770k that ran idle around 50_ -60 c and would get up to 80s and 90s when playing BF4 and other games. Now with this thing it runs idle at 19 to 23 c and got 37-42 when playing battlefield. I have not overclocked yet and plan to do so after a little more testing. Obviously that change made up for the nightmare installation. The screws given are realllly short so if they dont reach get 6x32 1 1/2 inch to attatch the fan to the top of the case if they dont reach (get washers or nuts if the hole is too small. another problem arose! i have the corsair 650d case which is apparently designed just for corsair liquid cooling systems so you either need to drill holes on the case or only screw one fan to the case and wire tie the other one up tightly. Use needle nose pliers to take the pins out of the cpu block to change the led color plate and then use a razor knife or something skiny and strong enough to take logo plate off. Oh god the cpu block was the worst part, it made me want to kill myself. you need two people for this part one to hold the back plate up agaisnt the back side of the motherboard and one mentally sane person to try to get the water block pushed up agaisnt the cpu while getting the shitty forever moving out of place screws with springs on them which i assume is made to move to fit different socket types.so now push on the block to get the springs to compress to get the screw to the point where it will thread. screw it in with a screw driver (good luck if you try to use the thumb screw part) at the same time all while holding the backplate in place which is absolutely impossible maybe i am just really dumb but yeah... Sorry for lack of punctuation and what not i wrote this on my phone and do not care i just wanted to rant about the issues of the installation and try to help out other people. Yes this was a difficult installation but its well worth the blood, sweat, tears, and swearing for this awesome machine.


Great product gets a 5 star in performance
01-14-2015
Reviewer:David (2)
Awesome product! I got this just the otherday to cool my intel i7 4770k that ran idle around 50_ -60 c and would get up to 80s and 90s when playing BF4 and other games. Now with this thing it runs idle at 19 to 23 c and got 37-42 when playing battlefield. I have not overclocked yet and plan to do so after a little more testing. Obviously that change made up for the nightmare installation. The screws given are realllly short so if they dont reach get 6x32 1 1/2 inch to attatch the fan to the top of the case if they dont reach (get washers or nuts if the hole is too small. another problem arose! i have the corsair 650d case which is apparently designed just for corsair liquid cooling systems so you either need to drill holes on the case or only screw one fan to the case and wire tie the other one up tightly. Use needle nose pliers to take the pins out of the cpu block to change the led color plate and then use a razor knife or something skiny and strong enough to take logo plate off. Oh god the cpu block was the worst part, it made me want to kill myself. you need two people for this part one to hold the back plate up agaisnt the back side of the motherboard and one mentally sane person to try to get the water block pushed up agaisnt the cpu while getting the shitty forever moving out of place screws with springs on them which i assume is made to move to fit different socket types.so now push on the block to get the springs to compress to get the screw to the point where it will thread. screw it in with a screw driver (good luck if you try to use the thumb screw part) at the same time all while holding the backplate in place which is absolutely impossible maybe i am just really dumb but yeah... Sorry for lack of punctuation and what not i wrote this on my phone and do not care i just wanted to rant about the issues of the installation and try to help out other people. Yes this was a difficult installation but its well worth the blood, sweat, tears, and swearing for this awesome machine.