186 users browsing
|Black Ice GTX Xtreme 360 Radiator - Black
|Part #: ex-rad-109
|| Click image to view
||Results: 1-9 of 9
Am Very Impressed
Reviewer: K6CTX (4)
This radiator is part of my first water cooled rig and I chose this one over other brands because of its high number of positive reviews. This radiator is cooling an i7 3930k OCd to 4.2 Ghz as well as two GTX 680s and my temps are outstanding. My CPU does not go above 65C while running prime95 for four hours and my 680s hover in the low 40s when running 3dMark or Unigine. I''m using a push/pull fan configuration to squeeze as much performance as possible out of this radiator but I think anyone would be happy with using either method by itself. Flushing the radiator was not too much of a problem and I did not encounter any rust as a reviewer mentioned with 240mm version, just the usual black specks. Even those were not numerous. I can''t speak for other brands since I am new to water cooling, but this radiator works very well and I have no regrets.
Reviewer: Agent X (8)
I am using 4 of these and a single variant in an extended ascension MM case with 108 cfm fans. Cools my rig to ambient while idling and 15c above when loaded with games or stress tests. The only down side to these was that the screw holes on mine weren''t drilled correctly which made fastening these to my case a bit tough.
Black Ice R+D nailed it with this one.
Reviewer: k8idx (2)
This works better mounted to the top inside of the case, than a Swiftech triple 120 mounted outside of the case! I used the same medium speed fans for both configurations, and the loop consisted of two GPU''s (GTX590), and an I7-2600k. The CPU temp (with the Black Ice rad inside)is almost 10 deg c lower than the Swiftech tripple outside! This RAD is worth every penny and more.
Reviewer: Alex (6)
This was the first radiator I ever purchased and I could not be happier with it. Construction is excellent and provides great temps. I would purchase again.
Reviewer: ForNever (6)
After much debate, I settled on this rad to cool the hot side of my peltier chiller. Replacing a single pass 120mm single fan radiator, I saw dramatic improvements. Chilled water temps went from 51F average to 42F. (72-74F ambient) Which is an enormous difference. I wound up having to overclock the cpu to avoid condesation problems, a very good problem to have!
Although I hadn''t planned on spending this much money, it was certainly worth it.
Reviewer: Desert Booger (11)
This thing works great, just make sure you have room if you plan on an interior install.
On a Cosmo-S you won''t be able to use your top 5" bay......this thing is thick!
Best Rad to cool 2 4870x2 CrossfireX
Reviewer: chispy (1)
Umbelievable Performance , I bought it to cool down my 2 4870X2 CrossfireX with EK Blocks Acetal. My iddle temperatures on both cards are 32c and under load 37c , the temperatures hardly moved even when the cards are overclocked and under full load, excellent results,highly recommended. As always excellent customer service and fast shipping from frozencpu.
Reviewer: jlin9998 (7)
this radiator is worth every cent i have just 3 silverstone fans running at less than half speed hooked up to this and my temps are rock solid at 40-42C cpu and vga this is the ultimate radiator
Reviewer: jlin9998 (7)
this radiator rocks!!cooling my cpu and vcp have only 3 fans on it at less than half speed and my temps are 45C for my cpu and 40C for my vcp i will definatley buy this radiator for my next water cooled rig