 |
|
| FrozenCPU Sleeving Kit - UV Blue |
| Part #: slt-19 |
|
|
Price: $14.95
|
 |
Click image to view |
|
|
|
 SHOPPING CART  PRODUCT LINKS |
Average Rating:  |
Results: 1-3 of 3 |
So easy a caveman can do it??
11-12-2009
Reviewer: Fred (1)
I think not. This is by far the most pain in the rear thing to do. Unless you have the proper tools and I am not talking about the ones in the kit because they are worthlessly cheap. The kit itself is awesome very cool brilliant blue braided sleeves. You can probably sleeve at least 2 PSU''s with this kit. Make sure you put a zip tie on the frayed ends before you heatshrink so it doesn''t pull out. I also after struggling with the tools bought the good ones they have here on the website.
Not bad but not great
04-15-2009
Reviewer: Iconoclast (4)
This kit isn''t bad but it''s not great either. I used it to sleeve an OCZ Powerstream 520watt which comes 1/2 sleeved from OCZ. I planned on doing both 2 foot lines of ide/floppy and the sata line but ran out of 3/8th sleeve after doing the ide/floppy. 3-5 feet more would be a great help for those of us running newer larger PSU''s. The Heat shrink tubing is ugly so i used some high quality automotive heatshrink in it''s place.
in my opinion the 1/8th and 1/4" sleeving included could be cut to 5 feet instead of 10 and the 3/8th" could be made into 10feet since these are really only useful for the floppy line and any fans you might have (not part of psu). also my package was lacking the tie wraps (zip ties) but that was fine with me too since i used black ones anyways.
the sleeving is actually UV reactive tho which is great! i highly recomend using a bic pen taken apart to make running wires through the sleeving go much smoother, and also a heat knife or lighter to singe the cut ends.
good molex/psu connector removal tools are also required as it''s next to impossible to get the sleeving over the connectors (though if your looking to buy this you already know that).
Good sleves, high price.
08-01-2007
Reviewer: Deucalion (11)
I bought this kit to sleeve my molex connection wires, not realizing that this was designed for a PSU. I didn''t have much trouble working with the tubing, and it glows really well, but i did run out of heat shrink tubing. This is a good kit, and i recommend it ONLY for PSUs. I also think that the price is a bit steep for a kit like this, even with as much as it comes with.
|
 |
About Us
Site Map
Shop by Brand
AC Cooling
