 |
99 users browsing
|
| Lamptron High Wattage 4 Channel Rheobus - Black (FC-3) |
| Part #: bus-183 |
|
|
Price: $39.95
|
 |
Click image to view |
|
|
|
 SHOPPING CART
 PRODUCT LINKS |
Average Rating:  |
Results: 1-6 of 6 |
 IF YOU NEED A FAN CONTROLLER!
Reviewer: MR.HAIRBEAR (2)
BUY.BUY,BUY!THIS CONTROLLER IS SO HOT!IT WORKS AND IT WORKS VERY WELL.I HAVE 7 THUNDERBLADE 120MM LED BLUE FANS.IN A NZXT M59 CASE.THIS CONTROLLER HANDLES TWO ON TOP OF CASE 1 FRONT FAN I REAR FAN.
IF YOU NEED A FAN CONTROLLER!
03-05-2011
Reviewer: MR.HAIRBEAR (2)
BUY.BUY,BUY!THIS CONTROLLER IS SO HOT!IT WORKS AND IT WORKS VERY WELL.I HAVE 7 THUNDERBLADE 120MM LED BLUE FANS.IN A NZXT M59 CASE.THIS CONTROLLER HANDLES TWO ON TOP OF CASE 1 FRONT FAN I REAR FAN.
top notch controller
08-02-2010
Reviewer: blaster1 (2)
This controller was perfect solution for my thermaltake spedo which came with 2304MM,140MM,120MM fans(4pin molex),works like a charm,very nice design,looks awesome,buy it
GREAT Controller
03-06-2010
Reviewer: Bobby (2)
Solid quality, great function, nice looks, can''t go wrong here. One minor issue: as shipped was too wide to pop right in. So I unscrewed one of the brackets from the PCB and elongated the whole ever so slightly, fixed it right up. This would not deter me from recommending this to anyone. My 5-year-old could have fixed it.
Seriously, get this controller, it''s AWESOME!
 GREAT Controller
Reviewer: Bobby (2)
Solid quality, great function, nice looks, can''t go wrong here. One minor issue: as shipped was too wide to pop right in. So I unscrewed one of the brackets from the PCB and elongated the whole ever so slightly, fixed it right up. This would not deter me from recommending this to anyone. My 5-year-old could have fixed it.
Seriously, get this controller, it''s AWESOME!
Very Satisfied
10-22-2009
Reviewer: Alex (4)
Although there were some significant problems with the product - this controller is of great quality and I would recommend it to anyone.
Mine had some problems, and I should hope that they are somewhat atypical.
Firstly it did not fit well in my case, it was too wide. I don''t have some unusual case, it''s a regular 5.23" slot like every other device in the world uses. I had to remove 2 screws that connected the metal on the sides to the circuitboard on the bottom, this way I could bend in the sides so they would fit. This doesn''t seem like a problem because the circuitboard is still resting on solid metal.
Secondly the 4-pin molex connector is bent way back and torn away from the circuitboard. It still works - I was worried I would have to solder and I''m not that great at it - but it is obviously damaged.
Don''t get me wrong, it''s working *great* and I love it, I just hope my problems are unusual.
|
 |
3448 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
