 |
|
| Hard Disk Drive Anti-Vibration Screw |
| Part #: scr-138 |
|
|
Price: $0.40
|
 |
Click image to view |
|
|
|
 SHOPPING CART  PRODUCT LINKS |
Average Rating:  |
Results: 1-1 of 1 |
screwed in a good way
06-12-2009
Reviewer: cwk (1)
These screws and grommet combo''s are the perfect fit for those who have purchased a normal tower and wanted to get rid of excess vibration from hard-drives! When they arrived I noticed that they are too large for standard case holes that are pre-punched for hard-drive screws. In order to remedy this you will need a 15/64ths (.234”) drill bit and a steady hand. After enlarging the holes for the grommet, (remove your hard drives first!), I test-fit the hard-drive with the grommets in. They slid in with minimal resistance and the screws held the drives in securely! After reassembly and booting, I thought I forgot to plug the hard-drives in. The vibration is GONE from my tower.
Thanks FrozenCPU!
Note: When installing the screws you only need to tighten them until they are firm, over tightening will result in cutting the grommet.
|
 |
About Us
Site Map
Shop by Brand
AC Cooling
