 |
|
| Dan T. (3) |
Results: 1-3 of 3 |
 |
01-31-2009
 Expensive for such a low GPH rating!
I came from a pondmaster 500GPH 110v pump to this. So, I''m a little biased towards 110v pumps. But, for this being a 12v pump and the rated 317gph rating is nice. The form factory is great, however since I have been using it for about 6 months now, it has developed an audible "tinging" noise. The flow is still there as the temps are proof of that. I''m not too worried about it as if it fails it has a warranty, and my hardware is safe due to bios settings. Always use the bios shutdown temp settings when watercooling! I''d probably buy and again and recommend to others. |
 |
01-31-2009
Very good block!
I had this on a 6800 GT and it was able to keep the temps within 10F of ambient with a heafty overclock and a volt mod. I fitted it onto my 8800 GT and it would have worked, but I wanted to try a full coverage block so I went with the Ione for the 8800GT. Well worth the money, and the build quailty is top notch. |
 |
01-30-2009
 A little pricey, but keeps load temps very low
I have this on a MSI 8800 GT OC edition. Stock is 625/1900(950x2), I have it at 740/2000 and my idle temps are 91F. Load temps never get higher than 100f. And this is with an ambient temp of 75F, and this is in loop with a apogee on a quad core 6600 @ 3ghz with a swiftech 3x 120mm rad.
Installation was straight forward, everything supplied was of quality and I would buy this block again.
Danger Den has quality products. |
|
 |
About Us
Site Map
Shop by Brand
AC Cooling
