 |
12-08-2007
 Eh
theyre pretty bright, but dont expect a miracle. I just ordered another set to put in my Lian li V2000 case because 1 set really doesnt light it all up, looks nice with my DFI Lanparty UT motherboard since that has UV reactive slots and connectors. |
 |
12-08-2007
 GREAT
Verrry Bright cold Cathode right here i have 2 of these mounting in the front (behind the mesh) on my lian li v2000 case and they literaly light up my room GREAT BUY! (the Transformers run a little hot but thats an easy fix) |
 |
12-08-2007
Far from perfect
But i guess thats what you get when something is hand made. i recieved mine and a few of the switches werent exactly straight one was higher than the others, not a biggy i bent them back as close as i could, just made the install into a Lian li Front panel a bit tougher. and seccondly. WAY prior to Installing and powering up, between each switch is a Transistor? or resistor?, little flat black chip with 3 legs, pay very good attention to weather or not those are touching the sides of the switches, if they do bend them away very carefully. as it will short the baybus, cause switches to not work properly and electrify your case. after i got all that worked out, this is really an amazing Baybus, i dont expect to replace this one anytime soon. would recommend to someone to buy. and would/will buy again |
 |
12-08-2007
nice radiator
the temps i got with this are great, not as flow restrictive as the older Heatercore style Thermaltake Radiators i had, and the temps are much lower, highly reccomend if your building a water cooling loop. |
 |
11-24-2007
Best stuff in its class...
Doesnt even compair to Liquid pro, BUT!. what i have noticed in using these 2 different thermal compounds is that for the most part AS5 works alot better on large contact surfaces, such as AMD and Intel CPU''s with the IHS'' intact. Also works better on the larger G80 gpu than liquid pro did. i Assume its do to poor surface contact as liquid pro tends to lay so flat that if the IHS or Heatsink arent both flat as glass liquid pro doesnt make good contact. and it also is useable on aluminum.
so IMO. Toppless CPU''s with copper coolers go with liquid pro
IHS''d Cpu''s and gpu''s with copper or aluminum Heatsinks go with AS5. |
 |
11-24-2007
Great Nonconductive compound.
This stuff is great used it on my 8800 when i installed my full coverage waterblock, wasnt being greatly carful with this stuff as its 100% non conductive. This stuff is probably the Best non conductive thermal paste to date.
my only complaint is its a bit on the gooie side, tends to get stringy like cheese on a hot pizza when your getting it out of the tube tends to leave little strings on stuff. |
 |
11-24-2007
good stuff
Its rubber, it covers cut metal edges, and it comes in black what more can you ask for! |
 |
11-10-2007
Top notch Product
This is running in my watercooling loop, along with a SWiftech Apogee GT, swiftech Microresivior, and a 120x2 and 120x1 Thermaltake Rad''s temps are amazingly better over, my old TT bigwater 745kit, obviously this pump flows nearly 3x more water than the Thermaltake pump. not much else to say about it. Its not nearly as loud as you think i cant hear it over my case fans, which are all 40cfm 120mm fans |
 |
11-10-2007
Best stuff todate IMO
Applyed to a Opteron 170 @ 3ghz 1.475v with no IHS under water cooling and my temps are 35''c loaded dual prime, Compaired to over 45''c on Dynex silver compound. which is about the lowest of the low when it comes to silver compounds.
this stuff is a bit tricky to apply but take your time and its well worth the extra couple of bucks for this stuff. |
46268 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
