 |
02-15-2008
 Best
Got two of these they fit perfectly on my P5N32 SLI Mobo they were easy to install and brought down my Motherboard temps to 38C and stay that way. One thing is if you over tighten the mobo bows and leaves the middle contacts unprotected what I did to correct this is cut a piece of tube bout half inch and placed it under the mobo and case so when I tightened the mobo down the tube pushed up against it and it worked. RECOMMENDED! |
 |
02-15-2008
Best of the best
This pump is powerfull I have two of them in a big loop and they both work flawlessly so far. You can feel the pressure in the tubes and its adjustable and surprisingly quiet. Recommend |
 |
02-15-2008
 Handy
Comes in handy to cut tubes but you can do the same with scissors plus if you have tubing that is big like 1/2" it wont cut it right. |
 |
02-04-2008
 Looks good but not as good as I thought.
This block looks cool but when you attach it to the mobo if you dont tighten the screw it wont cool that well, if you tighten too much one pin will pop out and you will need to loosen screw and start over. I got 55C 57C 60C 62C??? on my four cores not good with zallman I got 42C 45C 47C 49C and it is 1/3 size of this monster. I wouldnt recommend. Also tried 2 types of thermal paste stock and arctic silver 5 both ran hot and when you tighten scew if you have waterblocks on your mosfets check them cuz the mobo will bow with the pressure and leave your mosfets uncooled! For $50 I expected more.... |
 |
02-04-2008
Works great
This thing is huge takes up 2 5.25 bays and holds 2 bottles of fluid xp and only fills it half way but then again i have a huge loop. seems sturdy and well made thick plexi used and I feel comfortable with it and not too worried about leakage. |
 |
02-04-2008
Works
Does what it says and works great with ties or clamps 3/8 ID does not leak |
 |
02-04-2008
 Worst
This tubing stinks at least in my case. It collapses on itself and kinks like cheap tubing Ive used before. also feels like it will tear with a tight clamp. I do not recommend getting this tubing I have a 317 GPH pump and this tube cant handle it I guess. Gave it 0 cuz they say anti-kink in their name yet it sucks stay away. |
 |
02-04-2008
 Best Ive used
Best clamps to use when working with watercooling tubes they are a tight fit on any hose. |
|
02-04-2008
Bad
For this price and the size of this thing I would have expected more. My Quad Core Runs hot on this thing 50-60C accross four cores had a zallman 1/3 the size of this thing that cooled it from 40-50C accross the four cores forget this one. |
 |
02-04-2008
Bought 2
Bought 2 for my four Sticks but these things dont fit over Corrsairs XMS Ram not Koolance fault but letting you all know. |
About Us
Site Map
Shop by Brand
AC Cooling
