 |
|
| MINDSCI (15) |
Results: 11-14 of 14 |
 |
05-19-2008
 Could be Gooier
These are not as soft as I had expected for silicon, but they seem to work. |
 |
05-19-2008
 Total Isolation
These totally isolate the fan from the case panel by a mere millimeter or so. Suprisingly taught and secure. You''ll swear you''re gonna break them when your stretching and pulling them through, but you won''t. |
 |
05-11-2008
Awesome... But...
The fan came with the grill, but no mounting instructions or screws come with it. However, I had to totally mod the fan anyway...
I removed the mesh grill and hot glued stretched pantyhose over the whole thing, and then hot glued it into the plastic ring. Had to cut off all for mounts, and trimmed away 1/5 of the clear shroud to get it to fit in my mini tower side panel so it would reinstall! Cut hole with tin snips; drilled six holes thru the black ring and screwed in flush to the side panel. I then hot glued entire perimeter of fan hole edges and shroud on inside to help with sound dampening... Hope it never fails because its never coming out again! Now filtered air blows straight on MOBO and gives my case positive air pressure! A big plus for banning dust. GREAT FAN! |
|
05-11-2008
Further note
With a digital SPL meter at 1 meter it produces 41 DBA (frig OFF). HTPC rig mounted in a tight space in my entertainment center. |
|
 |
About Us
Site Map
Shop by Brand
AC Cooling
