 |
03-30-2009
 Great
30c idle, 65c load.
i7 cpu @ 4.0ghz, Bloodrage NB.
push pull 40c Yate Loon. |
 |
03-06-2009
 Don''t mix.
The utopia stuff is great.
But the black color mix is horrible. It did not dilute, instead gummed up. Now my tubes are covered in this sick looking black chunks, but the liquid itself is completely clear. |
 |
02-20-2009
 Not red.
Well, these are extremly not red lol.
Pinkish/orange when not under UV.
Under UV DARK orange.
There is no red at all.
They do their job however very well, and are easy to install. |
 |
12-15-2008
Yum
This product is very nice aesthetically as well as functionally.
This is not a controller were you can easily reach up and change the fan speeds but it''s great for monitoring RPMs and temps.
I like to keep my temp probes behind the mobo so they are warm enough to keep the fans on medium in automatic mode buy not loud.
As well as the manual setting to full RPM''s on all fans. (Manual mode for gaming auto for general use.)
In my personal use the clock/date is not that helpful due to placement of the PC as well as the annoyingly easy to hit reset button.
Other than the few minor hitches this product is great.
If you want a controller for speedy, exact control I''d go with one of the higher end knob controllers but for real time monitoring and amazing looks this is the one. |
 |
08-21-2008
 red?
It''s not red. It''s pink. and if you''re lucky part''s are more orange.
The heat shrink is well known as bad so be sure to order separate. All in all it''s decent. If you''re not pro at sleeving pay the extra 20$''s for FCPU to do it. It is a lot of work and somewhat tedious. |
 |
08-21-2008
meh
Work''s good, feels cheap on the outside but when it''s in it looks pro. Tons of wires on it so make sure you have room to stuff!
|
 |
08-21-2008
Red?
Orange*
Not red.
Not a big problem but still. |
 |
07-06-2008
Well
I tried the "sleeving" thing for the extra money. Don''t it literally fell off in less than 10 seconds of using it. I resealed it with more heat shrink but it fell off again the first time I used it again! The tool works good. Just don''t bother with the sleeving. BTW On the shiping package it has 3 boxes that are initialed by people who work on it. One is the sleever, one is the heat shrinker, one is the verifier. Guess which one was NOT initialed on mine?
yep
So that will be the last time I use one of those novelty options.
|
 |
07-03-2008
Good.
It''s a good kit. It''s not that good. The case is flimsy things will fall out of their holding spots, the tools are a little cheap but all in all a good kit for the price.
Does NOT have a molex tools just as an FYI ;p
that yellow one that looks like one happens to not be one. |
 |
07-03-2008
Good
It''s good for what it does. It''s not necessary but if your working on super expensive equipment it''s def worth the 10$ safety net. |
2896 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
