 |
07-29-2008
 Very well made...works exactly as described.
Matched these up with my chassis fans and my Sunbeam Rheobus-Extreme 6-Channel Fan Controller, and they have worked like a dream. I chose to get Red and Blue UV sleeving and it is really a job well done. If you need extensions for any of your fans, just get these. Don''t waste your time anywhere else. Quality is exceptional. Only gripe is that I wish FrozenCPU sold some longer ones ;). |
 |
07-29-2008
Awesome pump..but...
If your tubing system is 3/8" ID this pump will work because of the conversion kit, but they only converted the top tube to 3/8" ID. The tube coming out of the side is still 1/2" ID. You will need to purchase a reducer (1/2" ID to 3/8" ID) to make it fit in a full 3/8" ID tubing system. |
 |
07-29-2008
Awesome 80x80x15mm fan~
This thing is SILENT. They weren''t lying when they said this fan was SILENT. You gotta get your ear RIGHT up next to the thing to hear the spinning. And it really moves a good amount of air for how small and quiet it is. I am using this fan with the Thermalright HR-05/IFX on the ASUS Z7S WS mobo. I replaced the stock NB heatsink and slapped this fan with the HR-05/IFX. Since it is so thin (15mm) it fits anywhere. Probably one of the best 80x80x15mm fans out there. Keep in mind this fan uses Fluid Dynamic Bearings. For best performance, you need to give the fluid some time to warm up before the fan starts working at optimum performance. |
 |
07-29-2008
Very nice fitting....
This is a REALLY good looking fitting. The Chrome is a beautiful finish. This fitting fits on the following Thermochill Radiators: PA 120.1, PA 120.2, PA 120.3. I got 2 of these for my PA 120.3 and they work nicely. The rubber O-ring is a nice addition as I don''t need to bother with Teflon tape. Get these if you have a Thermochill Radiator that has G3/8" threading and your tubes are 3/8" ID. |
2898 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
