Reviews By Divinitus Umbra | Page 2

Advanced Search

Shop by Brand

Click to verify BBB accreditation and to see a BBB report.

Divinitus Umbra (20)	Results: 11-20 of 20

of 2

	Primochill 1/4" UV Reactive Leakproof Y Fitting - UV Red 08-16-2009 Great For Drain/Fill Purposes. I Used This For A Drain And Fill Point For My System Combined With The 1/4" Plug. Worked Great No Leaks.
	Primochill G 1/4" Threaded Elbow Barb - 1/4" ID - UV Red 08-16-2009 Worked I Use These Throughout My Elaborate Water Cooling Setup And They Work Great (If You Use Thread Sealant Tape, And Don''t Over-tighten Them. Plus They Are Cheep.
	Bitspower Black Sparkle G1/4" Barb Fitting - 1/2" ID 08-15-2009 Did The Trick Round One Of My Cooling Project I Used These Throughout My System. Fits All G1/4" Threading O Ring Sealed Well (When Only Sealed Once, It Stretched Out After A Few Goes With It.) I Recommend Using The Reusable Clamps With This Product Good Combo To Prevent Leaking.
	Fluid XP+ Nano-Fluid Liquid Cooling Fluid 32 oz. - Blood Red 08-15-2009 Non Conductive Really! I Used This Coolant The Second Round Of My Project And We Still Had Some Leaking Problems (I''m New At This) But This Product Is Amazing Bled All Over MB And No Problems.
	Fluid XP+ Nano-Fluid Liquid Cooling Fluid 32 oz. - Clear 08-15-2009 Great For Not Distroying Carpeting! The First Round Of My Project I Used This And Because This Is My First Liquid Cooling Project I Expect A Leak Or Two. But What I Got Was A Hosing, I Won''t Forget. And My Carpeting Thanks Me For The Color Less-ish Fluid. (It''s More Of A Cloudy White).
	Tygon® R-3603 1/2" ID (5/8" OD) - Laboratory Tubing 08-15-2009 A Little Too Flexible This Stuff Is Very Flexible Too Much So For My Taste, It Kinked With Little To No Effort. Even With Tubing Coils It Still Kinked But If You Are Running Some Tight Bends This Stuff Will Work Fine. But I Recommend Saving Yourself Some Cash And Going PVC Instead.
	Bitspower G1/4 Thread 90-Degree Rotary 1/2" ID x 5/8" OD Compression Fitting (BP-90R2CC4) 08-15-2009 I Was A Little Leary Of This But It Was Great! Swiveling Fitting Didn''t Sound To Safe But It Turned Out To Be One Of The Few Things In My Case That Didn''t Leak! (It''s My First Time) I Recommend This For Those Of You Who Have A Tight Corner To Make And Want It To Look Great. 1.5" From G1/4" To Corner End And 2" From Compression To Corner End.
	Koolance 1/2" (13mm) - (5/8")/(16mm ) External Diameter ID Tubing Wrap - Black (SPR-13BK) 08-15-2009 Difficult To Keep Even. Wire With Shroud It Stretches But Difficult To Keep Uniform. Did A Decent Job Of Keeping The Tubing From Kinking. But I Personally Recommend Primochill''s Coils Over This Product Due To The More Acceptable Uniformity.
	Bitspower High Flow Silver Shining Reducer - 1/2" to 1/4" Fitting (BP-WTP-C36) 08-15-2009 Worked This Fitting Was Used To Convert My 1/2" Tubing Down To 1/4" Running To My OCZ RAM Blocks, And Back To The MB. Worked As Expected.
	Swiftech MCP655™ 12v Water Pump w/ Speed Control and 3/8" Conversion Kit (317 GPH) 08-15-2009 No Power, No Flow! My PSU Couldn''t Keep Pace With Quad Graphics Cards OCed So The Pump Worked Great Until It Wasn''t Getting Enough Juice. But Aside From My Own Foolishness This Pump Is Great! I Bought The Optional Silver Covering This Is Amazing When You Pump Is In A Visible Place, Rubber Mat Was Great For Reducing Vibration.

of 2