Phone: 1.877.2.GET.COOL (1.877.243.8266)   Store & Phone Hours: M-F 10-6, Sat 11-4 Est. 1999 Bookmark and Share



Become a Fan on Facebook Follow FrozenCPU on Twitter Subscribe to our RSS Feed Click to verify BBB accreditation and to see a BBB report.




End Point E-commerce Development


Pietro (3) Results: 1-3 of 3
01-12-2010
Have had problems
Two out of the 4 channels would conduct the current even in the off position at random when you touch the variable resistors; so had to resolder them and the problem was gone. In order to resolder had to dissolve with acetone the foam that was glued onto the back of the card, couldn''t just peel it off as it was delicate. (They should''ve just included the foam in the kit but not glued it). Also the card only has 2 holes in 2 corners, not usable to fix it, need to drill more. A good thing about the card is the range of the voltage, you can slow down your fans as much as you want, unlike some other controllers that I used.
01-12-2010
Still noisy..
I think both previous reviewers have a point..I bought 6 of these and they are still on a noisy side even when slowed down to a maximum. They will emit a low-frequency kind of a rattling sound that other fans don''t have. Yet I still use them in my PC (just 2 for now) because, as it was mentioned, they are the only orange 120mm UV orange fans out there. They appear yellow rather than orange when viewed against UV Orange sleeving under a UV cathode. Another 120mm option for UV Orange could be ACRyan Blackfire, but they are much rather pink than orange. So the bottom line there''s no true UV Orange 120 fan at all(
08-21-2009
A Cute Low Profile Cooler
I''ve just received this cooler from FrozenCPU and I''d like to note that the picture above is not correct because the sign on the cooler reads ENZOTECH rather than ULTRA-X. 1366 support was added thru a sticker on a box, extra mounting items and an extra sheet with drawings. Overall the cooler looks great so I give it 5 stars although I haven''t installe dit yet. The stock fan came with a PCI bracked with speed knop, I''m going to replace it with a PWM fan. Wonder if an extra fan on the bottom heatsink would prove useful or just block airflow from the main fan.