 |
78 users browsing
|
| GoNuts461 (3) |
Results: 1-3 of 3 |
 |
09-11-2009
 Not what I expected
ATX tool is junk, broke it on the 3rd pin. It''s made of very soft material, almost like copper. I''ll make a new insert out of steel before i continue to my 24-pin.
Sleeving is not large enough for ATX bundle, neither is the shrink wrap. Sleeving only expands about 1/8" more than it''s nominal ID making it a pain to get over existing molex pins still on the wires.
The color is amazing, it is exactly how i wanted it. The additional stickey backs and tie-wraps are great and the molex removal tool works great!
I am sleeving a small Apevia Q-Box PSU so length is perfect on the sleeving, but i recomend ordering larger sleeving and shrink tubing for the ATX bundle.
This product is a great start to sleeving a PSU, just be aware, it''s not the best of quality. This is my first project sleeving, so i am not completely negative, i don''t have any more experience to base it on.
Good luck and be patient! |
 |
09-11-2009
 Pretty darn good!
I bought 2 kits for my Apevia Q-Box case to accent my Orange Sleeving Kit and my DFI LAN Party Jr Mobo.
One of the tubes is signifigantly less bright, it''s an ohmage thing i guess, with it only plugged in, it''s as bright as the other, but when both are in, it dims. Maybe look at getting 2 single kits if you want full intensity.
Since there was no "Void Warranty if Removed" stuck to the side, i took the case appart to mark +/- wires on the cathode side for sleeving purposes and i was very impressed with the PCB. It''s a very hearty build with sturdy components and it even has a micro glass fuse soldered to the board for a short circuit saver!
4 small tubes accent my 9x10x11 (HxWxD) case and still allowed me to hide my tubes from direct sight! |
|
 |
2919 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
