 |
09-21-2011
 Simple Reservoir
Easy to install, looks pretty. and does what it is intended to do. Keep air bubbles out of the system.
The LED is bright but if you use black electrical tape to mount it to the back of res, it won''t glare all over the place.. Would highly recommend. |
 |
09-21-2011
Running great so far
Good, powerfull pump. Running with a GPU and CPU loop through a triple radiator. Runs quiet.
This is my first water cooling build and couldn''t be happier.
Will keep you posted
OCZ Vertex 3 VTX3-25SAT3-120G 2.5" 120GB SATA III
ASUS Crosshair IV Formula AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX
AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, 3.7GHz Turbo Socket AM3 125W
EVGA GeForce GTX 580 3072MB Hydro Copper2 PCIe
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Antec High Current Pro HCP-1200 1200W ATX12V
Antec Twelve Hundred V3
Asus VH238H Black 23" Full HD
3x HDMI LED Backlight LCD Monitor |
 |
09-21-2011
Works as Advertised
Have the censor mount at the end of the loop (after CPU and GFX) and read the current temps.
Readable at low angles, but if get close to 180 it shows all 8s, which was to be expected. Would recommend |
 |
09-21-2011
 Beautiful
Nice Blue finish and works like it''s supposed to .
Woth noting that the fan mounting holes are over the fins and not water lines. Screwed up by driving a screw too far but only bent some fins. Very good design. |
 |
09-21-2011
Superior
Used these on my first water cooling system. I am glad I got these. installed them and no leaks the first time. Easy to install. Would highly recommend.
OCZ Vertex 3 VTX3-25SAT3-120G 2.5" 120GB SATA III
ASUS Crosshair IV Formula AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX
AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, 3.7GHz Turbo Socket AM3 125W
EVGA GeForce GTX 580 3072MB Hydro Copper2 PCIe
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
Antec High Current Pro HCP-1200 1200W ATX12V
Antec Twelve Hundred V3
Asus VH238H Black 23" Full HD
3x HDMI LED Backlight LCD Monitor |
 |
09-21-2011
Some work to get these to work
The thread that is for the rad is too big. Had to drill the hole a little bigger. Went in good but got to the end and they wouldn''t tighten. Don''t think the threads go up to the stop. |
 |
09-21-2011
Works good
Keeps my 1/2 hose from kinking. And they look cool |
 |
09-20-2011
 Do not use for AMD
Bought this for my new AMD AM3 CPU. The worst mistake I have ever made. You have to take apart the waterblock to put on the AMD plate. The o-ring will not stay in place to put it back together. I still haven''t managed to get it back together after 2 hours.. I will not buy EK products again. |
|
09-19-2011
Works Good
Nice deep blue coils to keep from kinking your tubes. |
3472 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
