Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 10-6, Sat 11-4 45963 fans like us! Bookmark and Share
  Advanced Search



161 users browsing

Tex (5) Results: 1-5 of 5
Aerocool Shark Blue Edition 120mm x 25mm High Air Pressure Fan w/ Blue LEDs
06-01-2011
Great Fan
I use these all over the place, putting 10 of them in a new case to push/pull on dual radiators. Quiet, pretty, and last forever while moving a good amount of air!
Phobya Shroud & Decoupling Gasket 120mm (7mm thickness)
05-04-2011
GREAT Sealer/Spacer for Corsair 800D
The 120x3 fan mounting area on top of the Corsair 800D case is beveled and prevents fans from being mounted flush externally. However, these Phobya Shroud/Gaskets have beveled edges on two opposing sides (as other poster mentioned) that allow it to sit "flush" very nicely atop the 800D!!! This allows an external fan to be properly mounted!!! The rubber is firm, but gives enough to form a perfect seal whilst providing a mini-plenum effect to help things out! HIGHLY recommended for this purpose or any other purpose where a nice 5/16" (7mm) clearance with a perfect seal is required. Absolutely a perfect solution for the 800D!!
Phobya Shroud & Decoupling Gasket 120mm (7mm thickness)
05-04-2011
GREAT Sealer/Spacer for Corsair 800D
The 120x3 fan mounting area on top of the Corsair 800D case is beveled and prevents fans from being mounted flush externally. However, these Phobya Shroud/Gaskets have beveled edges on two opposing sides (as other poster mentioned) that allow it to sit "flush" very nicely atop the 800D!!! This allows an external fan to be properly mounted!!! The rubber is firm, but gives enough to form a perfect seal whilst providing a mini-plenum effect to help things out! HIGHLY recommended for this purpose or any other purpose where a nice 5/16" (7mm) clearance with a perfect seal is required. Absolutely a perfect solution for the 800D!!
Bitspower G1/4" Silver Shining Dual Rotary 45-Degree Compression Fitting CC1 For ID 3/8" OD 1/2" Tube (BP-45R2CPF-CC2)
02-20-2011
Leaky Fittings
I ordered and received 3 of these fittings. 2 for a radiator and one for a pump. 2 of the 3 fittings leak at the mounting swivel junction. If I use straight fittings, I can''t access them when radiator is installed. My only solution considering the time and expense is use something else without the same leak potential. This delays my build another week at least! Not happy with this fitting at all.