 |
02-12-2012
 Try Antec
Cheap, flimsy, but they do look nice. The antec 200 x 30 is much better. |
 |
01-20-2012
 Excellent
Out-performs my Black Ice GTX Xtreme 240. I have it mounted on the back of my Antec with 2 fans going to my GPU. I haven''t seen temps over 40C idle or load. |
 |
01-20-2012
Worth It
I''m glad I got these instead of barbs with ugly hose clamps. Be sure to tighten the nozzle with a 19mm stubby wrench and tighten the top by hand to avoid cross-threading. With Feser Blue UV tube, it''s a perfect fit and you don''t need a wrench for the top fitting if you do most of the work outside of the case. |
 |
01-20-2012
Good.
It can still kink if you try hard enough. Whatever length you think you need, order twice as much. Excellent color, perfect size, great flow. But expect it to kink at a hard 90 degrees. |
 |
01-20-2012
Great
I have seen a lot of complaints about Primochill, but I don''t see any issues. Works as intended. I have idle temps between 17C and 32C depending on the component. I''ve yet to see any temps stay at 40C for very long, at load. |
 |
01-20-2012
Excellent
Great, high quality component. MY only complaint would be that the mounting holes are at the front rather than extending to the back also. You''ll spend half as much with this and one separate pump than buying any of the other Koolance res/pump combos. |
 |
01-18-2012
Excellent
I used to have terrible issues with heat while on air +-70C. I''ve yet to see my GPU go over 45 deg C under load. If you''ve got a GTX 570 or 580, I wouldn''t hesitate to buy this waterblock. Planning to get 2 more for triple SLI. |
 |
01-18-2012
 Very Loud
This fan is extremely loud at 100%. 55% for me is tolerable, so I had to clock it back to 55% max at certain temperatures with speedfan. However, this is the highest flowing fan I''ve ever had, so if noise is a sacrifice for cooling then it''s a must buy. |
 |
01-18-2012
Price, Performance, Ease of Use
For price per performance, I wouldn''t bother with anything else. This block is compatible with nearly every cpu and keeps my i7 950 at 28C-32C idle and 44C - 52C load overclocked to 3.8. I wouldn''t trust anything else when I go for 4.2. |
 |
01-18-2012
Quiet
Quiet and strong. I''ve got this pushing through CPU, GPU, NB + SB and Mosfet blocks and two radiators (140mm x 55mm Thick + 1x Dual 120mm). No issues with pressure, flow or cooling. My only complaints are it''s larger than expected and I stripped the plastic thread by tightening too much. I just cut the nozzle to get to the good thread. I won''t give a bad rating because I wasn''t careful though. Works great especially for the price. |
3471 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
