 |
Phobya Y-Cable, 3-Pin to 3x 3-Pin, 60cm, Sleeved, Black
Brand: Phobya |
|
 |
For connection of 2 fans with 3-Pin connectors to a 3-Pin connector (e.g. on the Mainboard). Please note that the speed monitoring of only one connected fan is possible with this adaptor cable. A white sticker on one of the cables shows which connector can be monitored. This cable is not only practical, it is also optically appealing, The surrounding mesh, also called...
|

Submit a review
|
$4.75
|
 |
24" Slim SATA 6 Gbps(7+6 pins) and SATA power combo cable (GC24SATA67)
Brand: FrozenCPU |
|
 |
The 4 Pin and SATA Data to Combined SATA Power / Data Cable powers your SATA device using a standard 4 Pin power connector and makes installation easy with only one connector to plug into the SATA device.
Power wires come sleeved in black from factory.
|

Read reviews
Submit a review
|
$2.00
|
 |
3 Pin Female Standard Power Connector to 4 Pin Male Standard Power Connector
Brand: FrozenCPU |
|
 |
The 3 Pin Female Standard Power Connector to 4 Pin Male Standard Power Connector is a great cable for plugging your fans that use standard 4 Pin power connectors into your motherboard's 3 Pin fan headers or any fan controller that uses 3 Pin power connectors.
|

Read reviews
Submit a review
|
$2.50
|
 |
3-pin Panaflo Fan Tail
Brand: Panaflo (NMB-MAT) |
|
 |
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|

Submit a review
|
$2.50
|
 |
3-pin Tailed Connector
Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the 3pin connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use.
|

Submit a review
|
$2.00
|
 |
3-pin to 4-pin Adapter
Brand: FrozenCPU |
|
 |
They are for converting a 3 pin fan to a 4 pin power connector for two reasons: 1) You are afraid to draw to much power from your motherboard. 2) You ran out of CPU fan headers. Handy adapter to have. Allows for you to bypass the 3 pin connector on your motherboard so you can plug your 3 pin fan directly into the power supply.
|

Submit a review
|
$2.50
|
 |
3-pin to 4-pin Adapter w/ RPM Monitoring
Brand: FrozenCPU |
|
 |
*Please note, female 3 pin fan header is actually a SHEILDED connector, the picture is in correct at this time!*
This 3 to 4 pin adapter will allow you to monitor high speed fans with your motherboard header while being powered right from your power supply.
|

Read reviews
Submit a review
|
$2.50
|
 |
3-pin Y Cable Splitter
Brand: FrozenCPU |
|
 |
This adapter allows for two 3 Pin fans to use one motherboard header or one standard 3 Pin power cable (either from a power supply or a fan controller).
|

Read reviews
Submit a review
|
$2.50
|
 |
3mm/5mm LED Power Cable
Brand: FrozenCPU |
|
 |
This cable is designed to power an 3.3v LED with a 4pin power supply connector. Built in resistor for easy LED lighging! Works on all 3.3v LEDs, 3mm or 5mm and is ideal for single LED lighting!
|

Submit a review
|
$3.00
|
 |
4 Pin and SATA Data to Combined SATA 22 Pin Power / Data Cable (SATA15PWD-75)
Brand: FrozenCPU |
|
 |
The 4 Pin and SATA Data to Combined SATA 22 Pin Power / Data Cable powers your SATA device using a standard 4 Pin power connector and makes installation easy with only one connector to plug into the SATA device.
|

Submit a review
|
$3.99
|
 |
4 Pin Floppy Adapter
Brand: FrozenCPU |
|
 |
The 4 pin floppy adapter is simply a nifty little cable that turns a 4 pin power supply plug into 4 pin mini plug required by floppy drives and as an added bonus it also provides two normal 4 pin connectors.
|

Submit a review
|
$2.50
|
 |
4 Pin to 8 Pin Female EPS 12" Adapter Cable
Brand: FrozenCPU |
|
 |
The 4 Pin to 8 Pin Female EPS 12" Adapter Cable lets you use your older power supply with a motherboard that needs an 8 Pin EPS connector.
|

Submit a review
|
$9.99
|
 |
4 Pin to Triple SATA Power Adapter Cable (SATA-PW3)
Brand: FrozenCPU |
|
 |
The 4 Pin to Triple SATA Power Adapter Cable allows you to power three SATA devices using one single standard 4 pin power connector.
|

Read reviews
Submit a review
|
$6.99
|
 |
4-pin Molex to 8-pin 12V Power Connector (PP-P4XEON)
Brand: FrozenCPU |
|
 |
This cable converts a molex power input into one 8-pin 12V Power Connector. Very useful if you wish to use a newer mobo with an older PSU.
|

Submit a review
|
$9.99
|
 |
4-Pin Molex to 90 Degree 6x 4-Pin Molex Power Adapter (CAB416)
The 4-Pin Molex to 90 Degree 6x 4-Pin Molex Power Adapter allows you to power multiple devices with a single 4-Pin power connect. The connectors are 1" apart making these ideal for racks of HDDs using 4-pin power. These adapter are also great for keeping cable management clean and neat.
|

Submit a review
|
$19.99
|
 |
4-Pin Molex to Serial ATA Power Adapter Cable - Green LED
Brand: FrozenCPU |
|
 |
This is an adapter that lets you power a Serial ATA drive with one 4pin molex connector. Features a glowing LED to alert you that power is present or just to spice up the inside of your chassis with some color.
|

Submit a review
|
$0.50
|
 |
4-Pin Molex to Serial ATA Power Adapter Cable - Red LED
Brand: FrozenCPU |
|
 |
This is an adapter that lets you power a Serial ATA drive with one 4pin molex connector. Features a glowing LED to alert you that power is present or just to spice up the inside of your chassis with some color.
|

Submit a review
|
$0.50
|
 |
4-pin Panaflo Fan Tail
Brand: Panaflo (NMB-MAT) |
|
 |
No more will you have to wire or solder your own lead on your Panaflo fan. You can use these on untailed Panaflo fans. Available with 4 pin power supply connector or 3 pin connector. Panaflo fans come untailed or bare wire leaving you high and dry. We had these special Panaflo connectors made that plug right into the outside of the Panaflo's fan motor. Simply plug the...
|

Submit a review
|
$0.50
|
 |
4-pin Pentium 4 to 8-pin 12V Power Cable Adapter - 6"
Brand: FrozenCPU |
|
 |
The 4-pin Pentium 4 to 8-pin 12V Power Cable Adapter converts the standard 4-pin Pentium 4 connection that is available on most power supplies to the 8-pin 12V connector needed for newer motherboards. The cable is 6 inches long. Comes sleeved black, use sleeving option to chose different colors.
|

Submit a review
|
$5.99
|
 |
4-Pin PWM Female to 4-Pin Female PWM Cable Adapter - 12" - Sleeved Black (MMT-FC-44-12BKS)
Brand: ModMyToys |
|
 |
This female-to-female 4-pin cable extension for any use where you need to connect 4-pin PWM fan headers to another male cable. These are perfect for use on the ModMyToys 4-pin PCB's we sell on the site!
|

Submit a review
|
$5.99
|
 |
4-Pin PWM Female to 4-Pin PWM Female Cable Adapter - 24" - Sleeved Black (MMT-FC-44-24BKS)
Brand: ModMyToys |
|
 |
This female-to-female 4-pin cable extension for any use where you need to connect 4-pin PWM fan headers to another male cable. These are perfect for use on the ModMyToys 4-pin PCB's we sell on the site!
|

Submit a review
|
$6.99
|
 |
4-pin PWM Male to 3-pin Female Adapter Cable 24" - Sleeved Black (CB-PWM-3F)
Brand: FrozenCPU |
|
 |
Convert your PWM fan back to standard 3 pin with the 4-pin PWM Male to 3-pin Female Adapter Cable. This cable is 24" long.
|

Submit a review
|
$5.99
|
 |
4-pin Tailed Connector - Female
Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extention to your fan's plug. Soldered and capped at the ends for no frays! Extra long leads for ease of use. Uses female connector on end and thinned leads for longevity.
|

Submit a review
|
$2.50
|
 |
4-pin Tailed Connector - Male
Brand: FrozenCPU |
|
 |
These are used with fanbus that require tailed fans. If you don't want to cut the power supply connector of your fans you can use these instead. Also gives a little extension to your fan's plug. Soldered and capped at the ends for no frays! Uses female connector on end and thinned leads for longevity.
|

Submit a review
|
$1.99
|
 |
4-pin to Dual 15-pin SATA Power Cable w/ Locking Clips (GC6ATAM2)
Brand: FrozenCPU |
|
 |
This cable powers two SATA devices from one 4-pin power supply connector and features the new plug design with the metal locking clip.
|

Submit a review
|
$3.00
|
 |
5-Pin VGA PWM Mini PH Connector to Dual PH Mini 4-Pin Fan Cable Splitter
Brand: FrozenCPU |
|
 |
5-Pin VGA PWM Mini PH Connector to Dual 4-Pin Fan Cable Splitter allows you to add additional cooling and yet still be controlled by the VGA card itself, same as the OEM fan.
Compatible with all common 5-pin mini header graphics cards, e.g. Asus GTX580 DCII.
|

Submit a review
|
$10.99
|
 |
6 Pin PCI-Express to Dual PCI-Express 6+2pin Y-Cable
Brand: FrozenCPU |
|
 |
The 6 Pin PCI-Express to Dual PCI-Express 6+2pin Y-Cable simply converts a single standard 6-Pin PCI-E connector into two 6-Pin / 8-Pin PCI-E connectors. It is great for updating an older power supply to work with newer hardware.
|

Submit a review
|
$9.49
|
 |
6-pin EPS to PCIE 6+2pin, Black Sleeved (CB-6M-68F)
This black-sleeved power cable adapter converts a EPS 6-pin female end to a 6+2-pin PCI-Express female end for the latest PCI-Express graphic cards. Cable length is 8 inches.
SATA 15-pin power header converted to PCI Express 6+2-pin header. Now you can convert a spare SATA 15-pin power connector from your power supply to a PCI Express 6+2-pin header to power up you...
|

Submit a review
|
$9.99
|
 |
8 Pin EPS-12V to Dual 8 Pin EPS-12V Y-Cable
Brand: FrozenCPU |
|
 |
The 8 Pin EPS-12V to Dual 8 Pin EPS-12V Y-Cable simply converts a single standard 8-Pin EPS-12V connector into two 8-Pin EPS-12V connectors. It is great for updating an older power supply to work with newer hardware.
|

Submit a review
|
$11.99
|
 |
8-pin PCI-E to 2x PCI-E 8pin Y cable
The 8-pin PCI-E to 2x PCI-E 8pin Y cable simply converts a single standard 8-Pin PCI-E connector into two 8-Pin PCI-E connectors. It is great for updating an older power supply to work with newer hardware.
|

Submit a review
|
$11.99
|