The 1/4" Fully Insulated Spade Connector is designed for quickly connecting and disconnecting devices. Usually matched with Female Spade Connectors (sold separately). Connectors are fully insulated.
The 1/4" Fully Insulated Spade Connector is designed for quickly connecting and disconnecting devices. Female spades also work on our round rocker switch as quick disconnects by themselves. Connectors are fully insulated.
The Military Switch Cable Harness is used to control any 4-pin molex powered device. Fans, lights and other molex driven devices can be hooked up to this cable and controlled via the military style switch.
These exclusive cables are designed to operate the Vandal Switch with ring illumination.
Plug the spade connectors of this LED cable onto the outer most connectors on the Vandal switch and plug the other end onto your motherboard's HDD LED jumper.
The required resistor for the LED is built into the cable.
These exclusive cables are designed to operate the Vandal Switch with ring illumination.
Plug the spade connectors of this reset switch cable onto the inner most connectors on the Vandal switch and plug the other end onto your motherboard's Reset Switch jumper.
These exclusive cables are designed to operate the Vandal Resistant Switch with ring illumination.
Plug the spade connectors of this LED cable onto the outer most connectors on the Vandal Resistant switch and plug the other end onto your motherboard's Power LED jumper.
The required resistor for the LED is built into the cable.
FrozenCPU Quick Disconnect Female Spade Connector - 6.3 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 6.3 Male ends such as the duck bill series of switches.
These are sold as individual connectors.
FrozenCPU Quick Disconnect Female Spade Connector - 6.3 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 6.3 Male ends such as the duck bill and Military series of switches.
These are sold as a 10 pack.
FrozenCPU Quick Disconnect Female Spade Connector - 6.3 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 6.3 Male ends such as the duck bill and Military series of switches.
These are sold as a 100 pack.
FrozenCPU Quick Disconnect Female Spade Connector - 2.8 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 2.8 Male ends such as the Vandal switch series of switches.
These are sold as a 100 pack.
FrozenCPU Quick Disconnect Female Spade Connector - 4.8 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 4.8 Male ends such as the standard toggle switch series of switches.
These are sold as individual connectors.
FrozenCPU Quick Disconnect Female Spade Connector - 4.8 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 4.8 Male ends such as the standard toggle switch series of switches.
These are sold as a 10 pack.
FrozenCPU Quick Disconnect Female Spade Connector - 4.8 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 4.8 Male ends such as the standard toggle switch series of switches.
These are sold as a 100 pack.
FrozenCPU Quick Disconnect Female Spade Connector - 6.3 are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 6.3 Male ends such as the standard toggle switch series of switches.
FrozenCPU Quick Disconnect Female Spade Connectors w/ Insulating Covers - 6.3mm are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 6.3 Male ends such as the duck bill or military series of switches.
These are sold as a 10 pack.
FrozenCPU Quick Disconnect Female Spade Connectors w/ Insulating Covers - 4.8mm are a great way to make your own quick disconnect cables. They also can be used to hook up to switch terminals with 4.8 Male ends such as the standard toggle switch series of switches.
These are sold as a 10 pack and come with insulating covers.
FrozenCPU Quick Disconnect Male and Female Spade Connectors w/ Insulating Covers - 2.8mm are a great way to make your own quick disconnect cables. They come with both male and female ends and the insulating cover to ensure no short circuits.
These are sold as a 10 pack and come with insulating covers.
FrozenCPU Quick Disconnect Male and Female Spade Connectors w/ Insulating Covers - 2.8mm are a great way to make your own quick disconnect cables. They come with both male and female ends and the insulating cover to ensure no short circuits.
These are sold as a 10 pack and come with insulating covers.
FrozenCPU Quick Disconnect Male and Female Spade Connectors w/ Insulating Covers - 2.8mm are a great way to make your own quick disconnect cables. They come with both male and female ends and the insulating cover to ensure no short circuits.
These are sold as a 10 pack and come with insulating covers.
FrozenCPU Quick Disconnect Male Spade Connector - 6.3 are a great way to make your own quick disconnect cables.
These are sold as individual connectors.
FrozenCPU Quick Disconnect Male Spade Connector - 2.8 are a great way to make your own quick disconnect cables.
These are sold as individual connectors.
FrozenCPU Quick Disconnect Male Spade Connector - 4.8 are a great way to make your own quick disconnect cables.
These are sold as individual connectors.
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 6.3 are a great way to shield your quick disconnect cables, spade conenctors.
These are sold as individual connector covers.
FrozenCPU Quick Disconnect PVC Insulating Spade Connector Cover - 4.8 are a great way to shield your quick disconnect cables, spade connectors.
These are sold as individual connector covers.