 |
Aavid Thermalloy High Pressure Heatsink - 35mm x 35mm x 12mm - Anodized Black
Aavid Thermalloy High Pressure Heatsink - 35mm x 35mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated con...
|
Submit a review
|
$2.99
|
 |
Aavid Thermalloy High Pressure Heatsink - 39mm x 39mm x 15mm - Anodized Black
The Aavid Thermalloy High Pressure Heatsink - 39mm x 39mm x 15mm is specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated controllers (RAID, SATA). These components do not generally have adequate cooling systems and are...
|
Submit a review
|
$1.99
|
 |
Aavid Thermalloy High Pressure Heatsink - 44mm x 44mm x 12mm - Anodized Black
The Aavid Thermalloy High Pressure Heatsink - 44mm x 44mm x 12mm is specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated controllers (RAID, SATA). These components do not generally have adequate cooling systems and are...
|
Submit a review
|
$2.45
|
 |
Aavid Thermalloy Mini Heatsink - 19mm x 19mm x 12mm - Anodized Black
The Passive Aavid Thermalloy Mini Heatsink - 19mm x 19mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated ...
|
Submit a review
|
$0.99
|
 |
Aavid Thermalloy Northbridge / Southbridge Heatsink - 38mm x 38mm x 10mm - Anodized Black (60mm Hole Spacing)
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 38mm x 38mm x 10mm - Anodized Black is designed to replace Northbridge or Southbridge coolers that utilize a 60mm mounting pattern. This cooler comes with mounting spring loaded pins.
Sold as single heatsink.
Heatsink comes with heat transfer adhesive on the base from the factory.
|
Submit a review
|
$3.99
|
 |
Aavid Thermalloy Northbridge / Southbridge Heatsink - 44mm x 44mm x 12mm - Anodized Black
The Passive Aavid Thermalloy Northbridge / Southbridge Heatsink - 44mm x 44mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBr...
|
Submit a review
|
$2.49
|
 |
Aavid Thermalloy Premium Chipset Heat Sink w/ 3M-8810 - 23mm x 23mm x 10mm - Anodized Black
The Aavid Thermalloy Premium Black Heat Sink - 23mm x 23mm x 10mm - Black is designed for circuit board chips but can be used for just about anything. They can be used as singles or stacked side by side for larger chips.
Sold as single heatsink.
Heatsink comes with heat transfer adhesive on the base from the factory.
|
Submit a review
|
$1.49
|
 |
Aavid Thermalloy Premium Heatsink - 33mm x 33mm x 15mm - Anodized Black
The Passive Aavid Thermalloy Premium Heatsink - 33mm x 33mm x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrat...
|
Submit a review
|
$3.00
|
 |
Aavid Thermalloy Premium Heatsink w/ 3M-8810 Adhesive - 14mm x 14mm x 10mm - Anodized Black
The Passive 3M-8810 Aavid Thermalloy Premium Black Heat Sink - 14mm x 14mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridg...
|
Submit a review
|
$1.10
|
 |
Aavid Thermalloy Premium Heatsink w/ T405R Adhesive - 26mm x 23mm x 10mm - Anodized Black
The Aavid Thermalloy Premium Heatsink w/ T405R Adhesive - 26mm x 23mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) an...
|
Submit a review
|
$3.99
|
 |
Akust Aluminum Memory Chip Heatsink - 15mm x 15mm x 8mm - 4 Pack (RS00-0403-AKS)
| Brand: Akust Technology |
|
 |
The Akust Aluminum Memory Chip Heatsink - 4 Pack are perfect for covering your exposed memory chips or other ICs that need additional cooling. These aluminum sinks come with adhesive thermal tape for easy installation and can be used for virtually any situation. These heatsinks are 15mm x 15mm x 8mm and can be used solo or stacked next to each other for larger surfa...
|
Submit a review
|
$5.99
|
 |
Alpha LPD25-10B Heatsink - 25mm x 25mm x 10mm - Anodized Black
The LPD25-10B Alpha heat sink offers a natural convection thermal resistance rating of 17.8 °C/W within a 25mm square footprint. The elliptically shaped, aerodynamic fins are set in a sparse pattern making it easier for air to efficiently flow through the heat sink, making this cooler an ideal choice for either passively or actively cooling high power LEDs.
Made fr...
|
Submit a review
|
$3.00
|
 |
Alphacool GPU Heatsinks 15mm x 15mm x 15mm - Black Anodized Aluminum - 10 Pack (17155)
| Brand: Alphacool |
|
 |
The ideal complement to cool mosfets on the motherboard or RAM chips of the Graphic Card on best way, requires separate cooler, which absorb the heat from the memory and release it into the air. As result, are waving low temperatures and better Over Clocking results. With the Heat Sinks can the cooling of MOSFET be performed very efficiently, at which the cooler is ma...
|
Submit a review
|
$9.99
|
 |
Alphacool GPU Heatsinks 7mm x 7mm x 15mm - Black Anodized Aluminum - 10 Pack (17156)
| Brand: Alphacool |
|
|
The ideal complement to cool mosfets on the motherboard or RAM chips of the Graphic Card on best way, requires separate cooler, which absorb the heat from the memory and release it into the air. As result, are waving low temperatures and better Over Clocking results. With the Heat Sinks can the cooling of MOSFET be performed very efficiently, at which the cooler is ma...
|
Submit a review
|
$6.99
|
 |
Chipset Aluminum Heatsink w/ 3M-8810 Adhesive - 20mm x 20mm x 6mm - Anodized Black
The Chipset Thermal Heatsink - 20mm x 20mm x 6mm is designed for motherboard chips but can be used for just about anything. They can be used as singles or stacked side by side for larger chips.
Sold as single heatsink.
Heatsink comes with 3M-8810 heat transfer adhesive on the base from the factory.
|
Submit a review
|
$2.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 10mm x 10mm x 10mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 10mm x 10mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$1.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 17mm x 17mm x 8mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 17mm x 17mm x 8mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integr...
|
Submit a review
|
$1.75
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 18mm x 18mm x 13.5mm - Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 18mm x 18mm x 13.5mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and int...
|
Submit a review
|
$2.75
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 12mm x 25mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 21mm x 15mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$2.50
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 14mm x 6mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 14mm x 6mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integr...
|
Submit a review
|
$1.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 14mm x 8mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 14mm x 8mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integr...
|
Submit a review
|
$1.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 15mm x 15mm - Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 15mm x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$2.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 21mm x 15mm x 10mm - Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 21mm x 15mm x 10mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$2.25
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 22mm x 22mm x 25mm - Anodized Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 22mm x 22mm x 25mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: peripheral control chipsets (SouthBridge) and integrated controllers (RAID, SATA). These components do not genera...
|
Submit a review
|
$3.99
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 22mm x 22mm x 6mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 20mm x 15mm x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$2.00
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 28mm x 28m x 15mm - Anodized Gold
The Passive Low Profile Chipset Heatsink w/ 3M-8810 Adhesive - 28mm x 28m x 15mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge...
|
Submit a review
|
$5.99
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 30mm x 30mm x 12mm - Silver
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 30mm x 30mm x 12mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integ...
|
Submit a review
|
$3.00
|
 |
Chipset Heatsink w/ 3M-8810 Adhesive - 37mm x 37mm x 24mm - Anodized Black
The Passive Chipset Heatsink w/ 3M-8810 Adhesive - 37mm x 37mm x 24mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: peripheral control chipsets (SouthBridge) and integrated controllers (RAID, SATA). These components do not genera...
|
Submit a review
|
$5.00
|
 |
Chipset Low Profile Heatsink w/ 3M-8810 Adhesive - 28mm x 28mm x 9mm - Anodized Black
The Passive 3M-8810 Chipset Heatsink - 28mm x 28mm x 9mm is designed for circuit board chips but can be used for just about anything. These passive heatsinks, specifically designed to correctly cool chips integrated into motherboards, such as: frequency generators (PLL), power supply regulators (MOSFET), peripheral control chipsets (SouthBridge) and integrated control...
|
Submit a review
|
$3.00
|
 |
Dynatron V35G Active VGA / Chipset Cooler - 2-Pin Version (V35G)
| Brand: Dynatron |
|
|
The Dynatron V35G Active Chipset Cooler - 2-Pin Version is an active VGA chipset cooler. This cooler features a 2-pin fan connector allowing it to be used on VGA boards that utilize a 2-pin connection. The push pin design is used on most cards along with a 55mm mount spacing.
These can also be used for motherboard chipset cooling provided the hole pattern is 55mm...
|
Submit a review
|
$9.99
|
55805 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
114 In Stock
