The Akust PCB 8-32 Spacer Support 6 allows you to create a standoff height of 63.5mm without creating any chance of electrical short. These nylon standoffs are 8-32 threaded on both ends.
The Akust PCB M3 Spacer Support 2 allow you to create a standoff height of 6.3mm without creating any chance of electrical short. These nylon standoffs are M3 threaded and can fit through PCB board ranging from 1.2mm to 1.7mm thick.
The Akust PCB Spacer Support M3 x 10mm is a great way to allow clearance from one board to another. The male end has a tab system insert that fits a hole size of 3.0mm and has a stand off height of 10mm. The top side is M3-0.5 thread allowing you to mount a second board or piece.
The Akust PCB Spacer Support Ø3 x 8mm allow you to create a wide surface to support PCBs without actually mounting directly through the PCB. These eliminate vibration on the PCB from other components.
The Akust Rustless Nylon Threaded PCB Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted PCB boards and other items 63.5mm off the surface.
The Akust Rustless Nylon Threaded PCB Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted PCB boards and other items 12.7mm off the surface.
The Akust Rustless Nylon Threaded PCB Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted PCB boards and other items 6mm off the surface.
The Akust Rustless Nylon Threaded Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted pieces 18.5mm off the surface.
The Akust Rustless Nylon Threaded Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted pieces 11mm off the surface when using M2 threaded screws.
The Akust Rustless Nylon Threaded Spacer doesn't conduct electricity and will never rust. These spacers allow you to create stand off space or elevate mounted pieces 12mm off the surface. These are great for creating airflow room on side panels or chassis tops when installing radiators externally.
The Fan Grill Standoff is mainly used with our custom fan grills. They raise the grill about 1/4" from it's fan hole for better air circulation. We recommend purchasing them in quantities of 4 for each fan grill.
The M3 x 3mm Shouldered Stand-Off are the same stand-offs that are used on some Heatkiller VGA blocks to hold the backplate on. These can also be used for other DIY projects as well.
Item sold as a single stand-off!
The Motherboard Standoffs / Screws / Washers Kit (36 Pieces) is a full set of standoffs, washers, and screws for motherboard mounting that use m3 thread type. 12 each are provided to mount most motherboards.