Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 10-6 55805 fans like us! Bookmark and Share


1023 users browsing
Become a Fan on Facebook Follow FrozenCPU on Twitter Subscribe to our RSS Feed





  Switch to gallery view

Thermal Pad - 1.5mm  Results 1-17 of 17
Sort By:
3M 3M-467MP Thermally Conductive Adhesive Transfer Tape - 25mm x 25mm x 1.5mm 3M 3M-467MP Thermally Conductive Adhesive Transfer Tape - 25mm x 25mm x 1.5mm

The 3M 3M-467MP Thermally Conductive Adhesive Transfer Tape is an adhesive transfer tape with acrylic adhesive on a polycoated kraft paper liner. Excellent shear strength, temperature resistance and chemical resistance. Excellent moisture and solvent resistance. Excellent high temperature resistance and shear strength. UV resistant. Easy to apply. Not messy. Easily d...


Submit a review
$1.50

Akasa Thermal Pad Gap Filler - 30 x 30 x 1.5mm - 2 Pack (AK-TT300-01) Akasa Thermal Pad Gap Filler - 30 x 30 x 1.5mm - 2 Pack (AK-TT300-01)
Brand: Akasa  

The Akasa Thermal Pad Gap Filler - 30 x 30 x 1.5mm - 2 Pack is a great solution for thicker applications needing needing 1.5mm thick pads. These have a protective coating on each side that needs to be removed before use. This ensures a clean contact surface.


Submit a review
$5.99

EK System Builders Thermal Pad Full Sheet - 305mm x 305mm x 1.5mm EK System Builders Thermal Pad Full Sheet - 305mm x 305mm x 1.5mm
Brand: EK Water Blocks  

A full page of thermal pad! Make your own sizes to fit anything you need. The System Builders Thermal Pad Full Sheet starts at 310mm x 310mm (12.2" x 12.2") and is 1.5mm thick. Both sides have a protective plastic that can be peeled once ready to apply.


Submit a review
$79.95

EK Water Block Replacement Thermal PAD C 1.5mm - (50x25mm) EK Water Block Replacement Thermal PAD C 1.5mm - (50x25mm)
Brand: EK Water Blocks  

Thermal pads and thermal compound are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact. Please consult your installation manual prior purchasing to see size and thickness is correct for your EK water block.


Submit a review
$3.75

Fujipoly / ModRight  <b>Extreme</b> System Builder Thermal Pad Blister Pack - Full Sheet - 300 x 200 x 1.5 - Thermal Conductivity 11.0 W/mK Fujipoly / ModRight Extreme System Builder Thermal Pad Blister Pack - Full Sheet - 300 x 200 x 1.5 - Thermal Conductivity 11.0 W/mK
Brand: ModRight™  

A full page of EXTREME thermal pad! This is the cream of the crop for thermal pads. With a 11.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 300mm x 200mm (11.8" x 7.87") and is 1.5mm thick. Both sides...


Submit a review
$205.99

Fujipoly / ModRight <b>Extreme</b> System Builder Thermal Pad Blister Pack - 1/4 Sheet - 150 x 100 x 1.5 - Thermal Conductivity 11.0 W/mK Fujipoly / ModRight Extreme System Builder Thermal Pad Blister Pack - 1/4 Sheet - 150 x 100 x 1.5 - Thermal Conductivity 11.0 W/mK
Brand: ModRight™  

A 1/4 sheet of EXTREME thermal pad! This is the cream of the crop for thermal pads. With a 11.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 150mm x 100mm (5.9" x 3.93") and is 1.5mm thick. Both sides ...


Read reviews
Submit a review
$51.49

Fujipoly / ModRight <b>Extreme</b> System Builder Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 11.0 W/mK Fujipoly / ModRight Extreme System Builder Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 11.0 W/mK
Brand: ModRight™  

A custom cut piece of EXTREME thermal pad! This is the cream of the crop for thermal pads. With a 11.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that can be peeled once ready to apply. Don't be left without when knee deep in your next build! ModRight Brings a rigid blister pac...


Submit a review
$13.49

Fujipoly / ModRight <b>Extreme</b> Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 11.0 W/mK Fujipoly / ModRight Extreme Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 11.0 W/mK
Brand: ModRight™  

A custom cut piece of EXTREME thermal pad! This is the cream of the crop for thermal pads. With a 11.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that can be peeled once ready to apply. Don't be left without when knee deep in your next build! ModRight Brings a rigid blister pac...


Submit a review
$10.49

Fujipoly / ModRight <b>Ultra Extreme</b> System Builder Thermal Pad Blister Pack - 1/2 Sheet - 200 x 150 x 1.5 - Thermal Conductivity 17.0 W/mK Fujipoly / ModRight Ultra Extreme System Builder Thermal Pad Blister Pack - 1/2 Sheet - 200 x 150 x 1.5 - Thermal Conductivity 17.0 W/mK
Brand: ModRight™  

A full page of ULTRA thermal pad! This is the very best available in thermal pads. With a 17.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 200mm x 150mm (7.87" x 5.9") and is 1.5mm thick. Both sides h...


Submit a review
$284.99

Fujipoly / ModRight <b>Ultra Extreme</b> System Builder Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 17.0 W/mK Fujipoly / ModRight Ultra Extreme System Builder Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 17.0 W/mK
Brand: ModRight™  

A custom cut piece of Ultra thermal pad! This is the cream of the crop for thermal pads. With a 17.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that can be peeled once ready to apply. Don't be left without when knee deep in your next build! ModRight Brings a rigid blister pack...


Submit a review
$24.99

Fujipoly / ModRight <b>Ultra Extreme</b> System Builder Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 17.0 W/mK Fujipoly / ModRight Ultra Extreme System Builder Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 17.0 W/mK
Brand: ModRight™  

A custom cut piece of Ultra thermal pad! This is the cream of the crop for thermal pads. With a 17.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that can be peeled once ready to apply. Don't be left without when knee deep in your next build! ModRight Brings a rigid blister pack...


Submit a review
$17.99

Fujipoly / ModRight Premium System Builder Thermal Pad Blister Pack - 1/4 Sheet - 150 x 100 x 1.5 - Thermal Conductivity 6.0 W/mK Fujipoly / ModRight Premium System Builder Thermal Pad Blister Pack - 1/4 Sheet - 150 x 100 x 1.5 - Thermal Conductivity 6.0 W/mK
Brand: ModRight™  

A full page of thermal pad! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 150mm x 100mm (5.9" x 3.93") and is 1.5mm thick. Both sides have a pr...


Submit a review
$22.49

Fujipoly / ModRight Premium System Builder Thermal Pad Blister Pack - Full Sheet - 300 x 200 x 1.5 - Thermal Conductivity 6.0 W/mK Fujipoly / ModRight Premium System Builder Thermal Pad Blister Pack - Full Sheet - 300 x 200 x 1.5 - Thermal Conductivity 6.0 W/mK
Brand: ModRight™  

A full page of thermal pad! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Make your own sizes to fit anything you need with this full sheet. The Fujipoly System Builder Thermal Pad starts at 300mm x 200mm (11.8" x 7.87") and is 1.5mm thick. Both sides have a p...


Submit a review
$89.99

Fujipoly / ModRight Premium Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 6.0 W/mK Fujipoly / ModRight Premium Thermal Pad Blister Pack - 60 x 50 x 1.5 - Thermal Conductivity 6.0 W/mK
Brand: ModRight™  

A custom cut piece of thermal pad for your VGA components! These are custom cut to fit your VGA Block. These can be easily cut to fit and provide the highest performance! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that c...


Submit a review
$8.99

Fujipoly / ModRight Premium Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 6.0 W/mK Fujipoly / ModRight Premium Thermal Pad Blister Pack - Mosfet Block - 100 x 15 x 1.5 - Thermal Conductivity 6.0 W/mK
Brand: ModRight™  

A custom cut piece of thermal pad for mosfet components! These are custom cut to fit your Mosfet Block and are much longer than most mosfet block bases. These can be easily cut to fit and provide the highest performance! This is the cream of the crop for thermal pads. With a 6.0 watt/mk thermal conductivity these pads will pull heat away from your important compon...


Submit a review
$7.99

Parker Chomerics Server-Grade G570 Thermally Conductive Transfer Pad- 20mm x 20mm x 1.78mm Parker Chomerics Server-Grade G570 Thermally Conductive Transfer Pad- 20mm x 20mm x 1.78mm

Parker Chomerics Server-Grade G750 Thermally Conductive Adhesive Transfer Tape is a thermally conductive interface pad that is designed for use between heat generating components and their heat sinks. G750 material conforms to surface irregularities under moderate application pressures to fill air gaps and enhance heat transfer. The woven fiberglass top shield all...


Submit a review
$1.50

Phobya Thermal Pad XT 100mm x 100mm x 1.5mm - 7W/mk (1 Piece) (17135) Phobya Thermal Pad XT 100mm x 100mm x 1.5mm - 7W/mk (1 Piece) (17135)
Brand: Phobya  

Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalize...


Submit a review
$23.99