|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
889 users browsing
My Wish List
Who We Recommend
The new Liquid.cool Strike ONE CPU block, designed for a High Flow setup while offering enthusiast performance, design and appearance.
Take your PC’s cooling performance to the next level and allow your components to be pushed further using this custom 240mm DIY cooling kit from Liquid.cool. The kit itself has everything you may need to create a custom liquid cooling set up to meet your needs. The 240mm copper radiator can disperse heat very efficiently and the included fans keep the radiator and your CPU cool under heavy loads. Custom liquid cooling can give you much better cooling performance compared to all in one cooling systems and traditional air coolers as you can make specific tweaks to your system to have it perform better.
Customise your Computer
When building a PC, it is very important to make it your own and tweak it to exactly how you like it. The kit contains all the bits you need to customise your water cooling set up and have it match the rest of your system. You can cut the included water cooling tubes to streamline your cooling. You can also change the colour of your coolant, using the included liquid colouring. With all the included accessories, you can tailor your water cooling set up to look exactly how you want.
The Vortex One range of DIY Watercooling Kits are an affordable way for beginners (and advanced users alike) to get involved and start having fun with PC cooling. You could go out and buy an All In One setup, but wheres the fun in that ? With these kits you get to place everything exactly where you need it, cut the hoses to size, fill the liquid yourself and then add in your own custom colour!
Here at Liquid.cool we manufacturer the best liquid on the planet for PC watercooling end of! If you like the look of “Opaque” setups rather than using the included Distilled + Transparent dyes, we recommend you check out the Liquid.cool CFX Opaque coolant from your Liquid.cool retailer. This coolant is a safe to use, non-clogging and non-separating High Performance liquid specifically made for the PC Watercooling industry.
AMD AM2 (+)
AMD AM3 (+)
AMD FM2 (+)
AMD AM4 Ryzen
1x Liquid.cool Strike One Universal INTEL & AMD CPU Waterblock
- Nickel Plated retention mount + nuts, springs washers
1x Low Profile Dual Pass Copper Radiator
2x 120mm White LED Anti Vibration Fans
1x 500lph Pump with Cylinder Reservoir Combo
1x 500 mL Liquid.cool Ultra Pure Distilled + 3 Dyes (UV Blue, UV Green, Red)
8x 13/10mm Matt Black Compression Fittings
2m 13/10mm Clear High Clarity Tubing
1x Visual Flow Meter
1x Liquid.cool LGA115x backplate
3x 5ml Dyes (UV Blue, UV Green, Red)
1x Silver Thermal Paste
1x White 5mm LED
1x 24Pin Bridging tool
1x Vortex One Manual
Total Reviews: 2 Average Rating:
Good kit but couldn''t use the water08-26-2019
Everything was as advertised, parts assembled easily and fit properly. But the water(and I''m not sure if it was the water or the dye as I used the red) had floating particles in it. I had to go buy distilled water and order some anti corrosive to add in later.
Great for the Price07-12-2018
Been using this liquid cooling kit for about 6 months now when they were on pre-order, I was notified by email that they would be in stock within a week, Got it within a couple days when my shipment notification hit, I put it together and never looked back, nice and lightweight, comes with liquid and Dyes, can''t beat it at the price.