Building a new water cooling system can be quite an adventure. All the new parts fresh from the factory. Connecting everything together. The one thing builds sometimes forget is the amount of film and residue left for the manufacturing process. This full new system kit takes all that away ensuring a solid loop that will need very little maintenance. All of these residuals can create havoc in a new loop and possibly require some early maintenance.

Use the rad clean to make sure any bits and residue is flushed out of your radiator while essentially scrubbing the inside of any chemicals or film.

Next the Sys Prep is used to clean the entire loop of any dust or other debris in the tubing blocks and other components ensuring a super fresh start.

Finally use the unique PrimoPrep to get your loop prepped for possible PH imbalances caused mostly by high levels of copper mostly from large capacity radiators. With this treatment it also prepares the system for use of coolants in a mix metal closed loop environment leaving the guesswork a thing of the past.

Specifications - Rad Clean

Bottle Size: 2oz
Included: 2oz Rad Clean, 2 plastic fittings w/ orings, 1 threaded funnel
Dosage: Mix 1/2 bottle with 32oz of DI or distilled water

Specifications - PrimoPrep

Bottle Size: 2oz
Dosage: Mix with 32oz of DI or distilled water
Shelf Life: 2 Years, Unopened

Specifications - Sys Prep

Bottle Size: 15ml
Dosage: Mix with 1 Gallon of DI or distilled water
Shelf Life: 2 Years, Unopened

Compatibility - Sys Prep / PrimoPrep

Sysprep and PrimoPrep are compatible with rigid and flexible tubing of all sizes. It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe! Not compatible with aluminum water cooling components.

Compatibility - Rad Clean

Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible! Not compatible with aluminum water cooling components.

Warnings

*Important to use plastic fittings when cleaning radiators while using Rad Clean!
*Do not mix preps with any pre-mixed coolants as it will over saturate the inhibitors.
*Not compatible with aluminum water cooling components.
*Not responsible for any hardware damage. Use at your own risk.

• All you need for your new cooling loop in one simple kit
• Water Based, Environmentally Responsible, Safe, and Non Toxic Product
• Sys Prep and PrimoPrep are Safe on All Plastics, Rubbers, and Miscellaneous Gasket Materials, Including Acrylic.
• Not compatible with aluminum water cooling components.