|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
44 users browsing
My Wish List
Who We Recommend
The Obsidian Series 800D is built to last through years of motherboard, power, memory, cooling, and component upgrades.
The steel structure has a matte black coating both inside out and is finished with a brushed aluminum faceplate for a professional look that’s both serious and awe-inspiring. A windowed side panel makes it easy to show off your work.
Here at FrozenCPU we took the best of the best and incorporated it into an advanced dual loop performance geared liquid cooling system.
First we took the XSPC Dual 5.25" Bay - DDC Dual Pump / Dual Split Reservoir and married it with dual MCP-350 pumps. This reservoir, even with both pumps mounted, only takes up two 5.25" bays and can be pulled out the front of the chassis to fill / refill as needed. As far as looks, there is no comparison to this unit. The black face plate can be removed to match up with any style chassis.
The quality is exactly what you would expect from the folks at XSPC. Embedded brass screw threads are inserted into the plexi to ensure no cracking when mounting the bay reservoir. O-rings are also affixed to the sides to eliminate any pump vibration and other unwanted sounds. Three LED mount holes are set into the rear of the unit so you can illuminate the res using 5mm LEDs. Four G1/4" threaded ports make the unit compatible with any size system.
Next we incorporated a variety of options for the CPU block. During conception the Swiftech XT was our choice but we have left that up to you to decide below!
The radiators was chosen due to it's unwavering success, the HWL's Triple and HWL's Dual Radiators. Hardware Labs only uses the best materials for their radiators. The fins and water channels consist of high-grade copper (e-Cu). The water chambers consist of a brass alloy. We used 1/2" x 3/4" compression fittings through out to give this set-up optimal flexibility.
The fact that this system is set up for two separate loops is what makes it so perfect for high end users. Your CPU can be cooled by the triple radiator exclusively while cooling your motherboard or VGA blocks be cooled by the second loop. Your imagination is the limit with two separate loops really!
-Corsair 750D Chassis
-Hardware Labs Triple Radiator
-Hardware Labs Dual Radiator
-XSPC Dual 5.25" Bay - DDC Dual Pump / Dual Split Reservoir
-Noiseblocker NB-Multiframe Fans x 5
-12+ Feet 1/2" x 3/4" Feser Tubing
-Swiftech MCP350 Pumps x 2
-Compression Fittings through out
-CPU Block (most choices included in price)
Notes: Picture shown with Swiftech Apogee XT, this can be replaced in the options below!
The power supply compartment, main compartment and the SATA bays each have dedicated cooling subsystems to prevent heat buildup.
A dust-filtered 140mm fan draws in cold air at the bottom of the chassis and exhausts it at the rear and top. This clever design forces fresh air directly over the graphics card and CPU. The SATA hot-swap bays are cooled by a separate 140mm fan which vents from the chassis via a sealed chamber and prevents the heat generated by the drives from entering the main compartment. The power supply compartment has its own dedicated intake and exhaust, also isolated from the main compartment.
Advanced Features for Extreme Flexibility
A four-drive SATA hot-swap drive bay sits in the front of the case, making it easier to install or swap hard drives on the fly. A unique cable routing system virtually eliminates cable clutter that can impede airflow. The tool-free design allows for easy entry, easy access, and quick installation of 5.25” drives.